Video Detail

Project XS Chevelle/Jim Barber of Classic Automotive Restoration Specialists With Sheet Metal Comparison.

Jim compare the sheet metal floors from Project XS with the new ones we ordered from Goodmark.

August 27, 2010 0 Comment(s)


Latest Videos

Week To Wicked 1972 Camaro Day 2 LS New Rollers
Day 2 and our 1972 Camaro is a roller again thanks to the the fresh Falken RT-615K+ tires (315/30/18 front and 275/35/18 rear) along with the beautiful American Legend Talon 18-inch two-piece wheels.
2017 Week to Wicked 1972 Camaro Super Chevy CPP Day 2
Day 2 of our Week to Wicked 1972 Camaro
Week To Wicked Camaro - Day Two AM - Chassis and Driveline Prep
A quick look at how our 1972 Week To Wicked Camaro is progressing. The morning focused on finishing the chassis and prepping the LS driveline for installation.
2017 Week to Wicked Super Chevy CPP 1972 Camaro Day 1
2017 Week to Wicked Super Chevy CPP 1972 Camaro Day 1
Week To Wicked 1972 Camaro - Day One CPP Parts installation and project walk around.
Checking of some of the day one action as we work to transform a boring 2nd gen Camaro into a pro-touring high-performance ride.
Iron LS1 5.7L Dyno pull inside the dyno control room - hitting the rev limiter. 456hp
One of the tuning runs for our leftover LS1 iron 5.7L LS engine build. This was with the upgraded Fast 92mm intake and we ran it up to the rev limiter. Later we raised the limiter a bit and squeezed out a couple more hp.
Iron 5.7L LS1 budget engine dyno run - Fast 92mm Intake
We took the rotating guts from an LS1 engine and stuffed them into a bored out 5.3L block for a budget engine that put out over 450 horsepower on the Westech Superflow 902 dyno!

sponsored links