Super Chevy Magazine Homepage Super Chevy

1970 Chevy Chevelle Restoration Panel Seam

Prev  Next
1970 Chevy Chevelle Restoration Panel Seam

1970 Chevy Chevelle Restoration - Good Mark Chevelle Project Car-Part 1
After the factory lead is ground out of the roof-to-quarter panel seam, it will become evident where the cut will need to be. Here again, leaving some of the old quarter attached will help with lining-up the new one. Make sure not to cut through the inner structure. The body will become weak if the roof is cut off. View Related Article
1970 Chevy Chevelle Restoration Ss Chevelle 1970 Chevy Chevelle Restoration Quarter Panel 1970 Chevy Chevelle Restoration Panel Seam 1970 Chevy Chevelle Restoration Rusted 1970 Chevy Chevelle Restoration Inner Structure 1970 Chevy Chevelle Restoration Replacement Panel 1970 Chevy Chevelle Restoration Inner Panel
1970 Chevy Chevelle Restoration Tack Welding 1970 Chevy Chevelle Restoration Support Welds 1970 Chevy Chevelle Restoration Panel 1970 Chevy Chevelle Restoration Trunk Edge 1970 Chevy Chevelle Restoration Alignment 1970 Chevy Chevelle Restoration Next Stage 1970 Chevy Chevelle Restoration Vise Grips
1970 Chevy Chevelle Restoration New Quarter Panel 1970 Chevy Chevelle Restoration Roof Seam 1970 Chevy Chevelle Restoration Different Seam 1970 Chevy Chevelle Restoration Close Up

 

Get Adobe Flash player