With the bottom frame set aside, we move to the seatback. There's a considerable amount of hardware to be removed compared to the seat bottom. Parts include the bezel for the seat belt, the seatback panel, and the seatback release bezel.Parts include the bezel for the seat belt, the seatback panel, and the seatback release be It's back to pulling hog rings again in order to gain access to the lock strap housing, which needs to be removed. Once access is obtained, remove the necessary nuts and bolts and pull housing out.It's back to pulling hog rings again in order to gain access to the lock strap housing, wh The next step is to remove the seatback bumpers. One was broken upon arrival. Thanks to Matt's kung fu grip, it was not a problem.The next step is to remove the seatback bumpers. One was broken upon arrival. Thanks to Ma Once the remaining hog rings were removed, all the foam was peeled away to gain access to these hidden nuts, which hold the upper seatback trim in place.Once the remaining hog rings were removed, all the foam was peeled away to gain access to All the components to be reused were moved to the media blaster. Mid America Motorworks uses a special media for this, mainly composed of plastic. This less harsh blasting method removes the rust without compromising the integrity of the parts.All the components to be reused were moved to the media blaster. Mid America Motorworks us Once the parts are clean of all debris, they are sprayed with black paint to seal against the elements and give a nice factory look.Once the parts are clean of all debris, they are sprayed with black paint to seal against Once the paint was dry, it was back to work. Matt began to install needed hooks and wire to the seatback foam in order to anchor the seat cover and frame.Once the paint was dry, it was back to work. Matt began to install needed hooks and wire t After the seat frame was acquainted with the new seatback foam, special hog ring pliers were used to fasten it all together.After the seat frame was acquainted with the new seatback foam, special hog ring pliers we Once complete, it was time to start mating the seat cover to the front half in order to reinstall the upper trim.Once complete, it was time to start mating the seat cover to the front half in order to re Liberal amounts of spray adhesive are applied in order to attach the seatback upper molded foam.Liberal amounts of spray adhesive are applied in order to attach the seatback upper molded « | 1 | 2 | 3 | » | View Full Article By Dan Ryder Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
