1955 Chevy 210 Custom Interior - Sound System

Using a sharp razor blade, trim the corner of the foam on roughly a 45-degree angle.
After shaving the edge with a razor, some 80-grit sandpaper helps smooth out the radius.
To get the material to fit around corners, a series of cuts need to be made to prevent the material from puckering.
To get the material to fit around corners, a series of cuts need to be made to prevent the

With the upholstery glued to the foam, brush a little glue to the backside of the panel.
Stretch the material around the panel and then attach it to the tacky glue on the back side of the panel.
Stretch the material around the panel and then attach it to the tacky glue on the back sid
For the corners fold the extra material over, making sure that there are no wrinkles forming along the edge of the panel.
For the corners fold the extra material over, making sure that there are no wrinkles formi

Pulling the tab around the corner will stretch the upholstery tight and make for a professional- looking job.
Pulling the tab around the corner will stretch the upholstery tight and make for a profess
The corner is complete, just take your time and work your way around the entire panel taking time to firmly press the material into the insets and smooth out any wrinkles that may start to appear.
The corner is complete, just take your time and work your way around the entire panel taki
Lying them on the floor, we placed the quarter panel and door panel together to make sure everything flows and looks good. The only thing the door panel needs is the armrest that Jamie McFarland is sewing up for us.
Lying them on the floor, we placed the quarter panel and door panel together to make sure

With the newly upholstered quarter panel and garnish molding test fit into place, we can get an idea of what the completed project is going to look like.
With the newly upholstered quarter panel and garnish molding test fit into place, we can g
While we had no problem upholstering the flat panels of the car, we let the experts at McFarland Custom Upholstery do the more intricate details. Here, Jamie lays down the Auto Custom Carpet and fits it around the console.
While we had no problem upholstering the flat panels of the car, we let the experts at McF
McFarland also installed the Novasuede headliner. The suede-like material looks like a million bucks!
McFarland also installed the Novasuede headliner. The suede-like material looks like a mil

The Grant steering wheel was re-upholstered in matching Majilite material to help tie the entire interior together while Auto Meter gauges, Lokar pedal kit, and Grant wheel all help to give the GT55 a classy sports car look.
The Grant steering wheel was re-upholstered in matching Majilite material to help tie the
McFarland and his team did a fantastic job of re-upholstering the stock rear seat to match it to the front Tea's Design seats using more of the high-quality Majilite material. The synthetic leather is very durable and not only that, it is super-comfortable too!
McFarland and his team did a fantastic job of re-upholstering the stock rear seat to match
Installed on the door, the freshly upholstered panel, new Danchuck handles, and Phoenix Gold speakers definitely look a lot better than the faded, worn-out panel that it replaced.
Installed on the door, the freshly upholstered panel, new Danchuck handles, and Phoenix Go

The finished trunk still has plenty of room for luggage, tool storage in the spare tire well, and continues the clean, luxury sports car look.
The finished trunk still has plenty of room for luggage, tool storage in the spare tire we
The last step was to install the Crow Ent. belts and fine-tune the killer Phoenix Gold/Kenwood sound system. It's now time for a road trip!
The last step was to install the Crow Ent. belts and fine-tune the killer Phoenix Gold/Ken

SOURCES
Mcfarland Custom Upholstery 28120 State Rte 410 E #A2 Buckley WA 98321	Raingear 693 Blue Sky Dr. Port Townsend WA 98368
Dynamat 3042 Symmes Rd. Hamilton OH 45015 513-860-5094 www.dynamat.com	Totally Stainless P.O. Box 3249 Gettysburg PA 17325 717-337-2151 www.totallystainless.com
Majilite Corporation 1530 Broadway Rd. Dracut MA 01826	Danchuk Manufacturing, Inc. 3201 S Standard Ave Santa Ana Ca 92705
Phoenix gold international, Inc. 9300 N. Decatur Portland OR 97203	Tea's design inc. 2038 15th St. NW Rochester MN 55901
Kenwood www.kenwoodusa.com	Crow Enterprises 418 E. Commonwealth Ave Unit 1, Fullerton CA 92832
Lokar Performance Products 10924 Murdock Dr. Knoxville TN 37932 8-65/-966-2269 www.lokar.com	Vintage Air 10305 I.H. 35 North San Antonio TX 78233 800-862-6658
Victory Glass 22624 Pacific Hwy S. Seattle WA 98198	Auto Custom Carpets, INC. PO Box 1350 Anniston AL 36202
Grant Products 700 Allen Avenue Glendale CA 91201 213-849-3171 800-952-6947