Related Photo Galleries
Here are all the tools we used to get the job done. If you were planning to restore the entire interior at some point, we would recommend you buy a cheap/used spray gun and fill it with a professional grade contact adhesive like DAP's Weldwood. If all you plan on doing is the headliner, then a can of Permatex Heavy Duty Headliner & Carpet Adhesive or 3M's Super 77 Multipurpose Adhesive will suffice. A heat gun will be used to relax the material, but if you don't have one of these, you can always use the old lady's hair dryer. You will also need a few screwdrivers, a putty knife, scissors or razor blade, and an awl. The awl will be your best friend towards the end of the install so if you don't have one, either buy or make one.