Here's the Muncie M-22 "Rock Crusher," as it's known. Have you seen the prices these thing
Have you ever had one of those strange dreams in which you find yourself running and getting nowhere? You struggle to make headway, but it seems no matter how much effort is spent, speed and progress are elusive. Now imagine what that must be like while driving your classic Chevy. A 427 sitting under the hood, a four-speed Muncie "Rock Crusher" under the floor, and 4.11 gears in the back. These are the most coveted parts any Bow Tie enthusiast could ever want. But on the highway, when the vehicle hits 60-70 mph, that recurring dream of running as hard as you can and getting nowhere is suddenly a reality. What would most of us do in that situation? We either mash the loud pedal a bit harder and wind out the rpm while the gear box howls like a Banshee, or we simply avoid long distance trips altogether. But why relegate your classic ride to a Saturday night malt shop cruiser?
The M-22, TH-350, and TH-400 were all great transmissions in their time, and even today are still being rebuilt and extensively used by hot rodders everywhere. However, their limitations are apparent when compared side-by-side to that of a Tremec five- or six-speed manual transmission. A Tremec transmission offers the user an overdrive gear or two that will break that high-revving rpm habit. These swaps into full-size machines are becoming more and more popular. For years, you never saw a gear-jammer in a full-size Bow Tie, but that's all changing. Now they're becoming almost as common as automatic ones.
Out with the old, in with the new. How could we resist a shot of the TKO-500 before the in
Recently, Classic Chevy 5-Speed developed a Tremec kit that will fit 1958 through 1969 Impalas. For those who may not be familiar with Classic Chevy 5-Speed, they take a basic Tremec transmission and adapt it to fit a particular vehicle. This may sound simple enough, but when you consider shifter relocation, driveshaft length, bellhousing issues, adapters, etc., this can be a migraine for most installers.
Recently we made the trip to Classic Chevy 5-Speed to cover the install of a Tremec TKO-600 into a 1966 SS Impala equipped with a factory 427 big-block, 4.11 gears, and a Muncie 4-speed. We took the Impala on the highway before the swap and made note of a few numbers-especially the rpm. With the Muncie in fourth at 70 mph, the tachometer read 3,700 rpm. After the Tremec swap we once again traveled at 70 on the highway; this time we shifted into fifth gear overdrive on the new Tremec. Thanks to the 0.68:1 overdrive, the tachometer this time read an ear-pleasing 2,375 rpm.
Here's a side-by-side shot of the old bellhousing with the new Classic Chevy 5-Speed bellh
We also took along a decibel meter. While traveling at 65 mph, the decibels in the cab read around 88dB prior to the transmission swap. After the swap, the decibel meter read approximately 82dB while traveling the same speed, this time in 5th gear overdrive. A 6dB drop is a huge difference. A 1dB drop would be big.
What we noticed even more than the drop in decibels was the vibration factor. Traveling 65-70 mph down the highway with the engine turning around 3,700 rpm you can't help but get the residual vibration from the flywheel to the rear gears. When the Impala was shifted into overdrive it was as smooth as riding on a magic carpet. The vibration that resonated throughout the vehicle instantly dropped the moment the rpm dropped, boosting the comfort level of the occupants. Not only that, fuel economy will also improve when the engine works 32 percent less than it needs to.
Besides all this, we took the Impala out for a test run after the tranny swap. We put that big-block to work and were grabbing gears like hell wouldn't have them. The Tremec transmission is rated to handle approximately 900 hp and 500 to 600 lb-ft of torque (depending on the model), so we knew we couldn't break it during our fun runs. And yes, it passed our fun tests too.
Depending on the vehicle's original equipment, two different kits for the Impala are available: the Deluxe kit and the Elite kit. What's the difference? The Deluxe kit is an option for vehicles already equipped with a four-speed, and for those owners who want to step up to a five-speed and reuse the clutch, bellhousing, etc. The Elite kit is an option for vehicles that have an automatic and are swapping it out to the five-speed. There are also optional upgrades (clutch, third pedal, flywheel, etc.) available for either kit, so check the Classic Chevy 5-Speed website to view all the options. Pictured here is the Elite Kit. It includes:
>>New TKO-500 or TKO-600 transmission
>>New adjustable cross member (for '65-69 model years only)
>>New polyurethane transmission mount
>>Speedometer cable/adapter custom mechanical speedometer cable with integrated adapter and gear. Electric speedometer kits are also available.
>>New driveshaft. Steel driveshaft complete with premium Spicer u- joints and Spicer C6 slip yoke, custom built for your car. All driveshafts are balanced using state-of-the-art equipment. Aluminum driveshafts are also available for an additional charge.
>>Reproduction aluminum GM 621 bellhousing
>>Hurst shift knob (black or white)
>>Hurst shift stick
>>Reverse light switch connector
>>Complete hardware kit
>>Optional offset shifter-High performance offset shifter.
>>This direct bolt-on replacement shifter achieves perfect shift stick positioning within your stock console and requires no modifications to your console.
>> Extended warranty