Although the reverser still uses a planetary gear set, it is operated with a slider rather than with the radial plate.Although the reverser still uses a planetary gear set, it is operated with a slider rather The fork actuates a slider gear over the rotating assembly that operates the planetary gear set.The fork actuates a slider gear over the rotating assembly that operates the planetary gea The fork and lever is inserted into the housing. An arm with a detent is attached to the lever to actuate the fork.The fork and lever is inserted into the housing. An arm with a detent is attached to the l The planetary gear set sits forward of the slider gears in the reverse housing. Exploded view of the reverse assembly shows the planetary gear set, sprags, washers, thrust bearings, slider assembly and output shaft assembly.Exploded view of the reverse assembly shows the planetary gear set, sprags, washers, thrus The housing cover is then bolted onto the reverse housing and the assembly is finished. Technicians check that the output shaft and the rest of the assembly rotate freely in one direction.Technicians check that the output shaft and the rest of the assembly rotate freely in one Once each planetary gear assembly is completed, it is bolted in the correct sequence to form the transmission, from the input shaft to the reverse assembly.Once each planetary gear assembly is completed, it is bolted in the correct sequence to fo Our completed transmission has five planetary gear assemblies that make it a streetable five-speed that can handle 1,200 horsepower and 850 ft-lbs of torque.Our completed transmission has five planetary gear assemblies that make it a streetable fi At the front of the housing, a sprag plate and a very heavy-duty sprag surround the output shaft.At the front of the housing, a sprag plate and a very heavy-duty sprag surround the output One of the only assemblies that is different in the Lenco transmission is reverse gear. This assembly not only engages the transmission into reverse but is also used for first gear and neutral.One of the only assemblies that is different in the Lenco transmission is reverse gear. Th « | 1 | 2 | 3 | 4 | 5 | » | View Full Article By Dan Sanchez Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
