A roll pin is used to retain the line bias valve. The line bias valve spring is replaced with a solid blocker rod. On the MTV upshift valve, the spring isn't replaced; it's simply removed and the valve is re-installed without it.On the MTV upshift valve, the spring isn't replaced; it's simply removed and the valve is Enlarging the holes in the valve body separator plate is easy, but be sure to follow the very detailed instructions and diagrams that are included. This allows increases in the line pressure and affects the shift characteristics.Enlarging the holes in the valve body separator plate is easy, but be sure to follow the v Per the instructions, the factory pressure regulator spring is set aside and the blue spring included in the kit was installed in its place.Per the instructions, the factory pressure regulator spring is set aside and the blue spri Before assembling the accumulator, the separator plate was prepared. Toy Shop uses transmission grease and spreads it on the gaskets to hold them to the plate. Then the grease is used to hold the check balls in place.Before assembling the accumulator, the separator plate was prepared. Toy Shop uses transmi The accumulator was assembled per the instructions included with the B&M kit and installed over the separator plate. Notice that two of the valve body bolts were installed through the plate to ensure everything was aligned properly.The accumulator was assembled per the instructions included with the B&M kit and installed With the accumulator holding the plate in place, the bolts were removed and the valve body was re-installed with its check balls installed per instructions.With the accumulator holding the plate in place, the bolts were removed and the valve body After reconnecting the wiring, the new B&M transmission filter was installed... ...and the cover re-installed. Megashifter InstallationThe Megashifter from B&M is available for some application-specific installations or it is available in a universal kit.Megashifter Installation The Megashifter from B&M is available for some application-speci For our '86 Z28, B&M offers PN 80692, which is designed to fit '82-92 Camaros with little modification.For our '86 Z28, B&M offers PN 80692, which is designed to fit '82-92 Camaros with little « | 1 | 2 | 3 | 4 | » | View Full Article Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
