A template is included to modify the factory trim plate. After marking the pattern, an air cut-off was used to cut the opening. Before installing the shifter trim plate, the proper gear indicator window (three- or four-speed) was installed. The trim plate bolts to the factory trim cover and everything uses the existing holes.Before installing the shifter trim plate, the proper gear indicator window (three- or four A rubber boot is included to keep debris from falling into the center console. After finishing the topside installation, we returned to the underside of the car and routed the cable and attached it to the bracket. Then the cable was adjusted per instructions and secured to the shift arm.After finishing the topside installation, we returned to the underside of the car and rout Supercooler InstallThe B&M SuperCooler is a really simple installation, though most applications will probably be a little easier than on our Camaro due to the radiator and air conditioning configuration. That said, it still only took about half an hour to install.Supercooler Install The B&M SuperCooler is a really simple installation, though most appl To install the SuperCooler it was necessary to loosen the radiator and tip it towards the engine. This allowed the SuperCooler to be slipped in between the front-end supports and the radiator. We installed the hoses before setting the cooler in place because the tight space would have made it very hard to attach the hoses and clamps once installed.To install the SuperCooler it was necessary to loosen the radiator and tip it towards the Once in place, the hoses were routed to the passenger side of the engine compartment. This photo shows the supports that required our radiator to be moved (the cooler almost fit between the braces, but didn't quite make it).Once in place, the hoses were routed to the passenger side of the engine compartment. This The hose connections are simple. The SuperCooler works in addition to (not in place of) the factory transmission cooling system.The hose connections are simple. The SuperCooler works in addition to (not in place of) th We finished off the project by filling the transmission with B&M's Trick Shift automatic transmission fluid.We finished off the project by filling the transmission with B&M's Trick Shift automatic t SOURCES B&M Performance Products 8-18/-882-6422 bmracing.com Toy Shop Transmissions 1292 E. 3rd St. Pomona Ca 91766 « | 1 | 2 | 3 | 4 | View Full Article Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
