Super Chevy
Click here to find out more!

GM Performance Parts 350ci/330HP Crate Motor Build

We Get More Power Out Of A GMPP Crate Motor With Goodies From Brodix, Lunati, And Speed-O-Motive.

By , Photography by

John Barkley, one of our associates here at Super Chevy, just recently did a little horse-trading and ended up with a fresh GM Performance Parts (GMPP) 350ci/330HP crate motor. He is an avid hot rodder and was a successful drag racer for many years (he even has a Wally in his trophy case from winning the Stock Eliminator class at the 1983 Winternationals). John is constantly building something, and his most recent project is a '66 Bel Air that could use some more power under the hood. He plans on using the car for cruising and light track duties. Even though the GMPP 330hp crate motor would motivate his land yacht of a car just fine, we would rather have the big ship run more like a small flat bottom drag boat.

We set John loose with the task of finding a solid upgrade for his engine that didn't require special machining or messing with the rotating assembly. He contacted Brodix for one of the company's top end kits, to take out the guesswork when it comes to finding components that work with each other. Brodix combines a set of the company's IK (Iron Killer) 180cc aluminum heads with a matching dual plane intake manifold, and all the little things like gaskets and hardware needed for the swap.

The heart of the Brodix top end kit are the heads; these feature ultra casting, 180cc intake ports, and 64cc combustion chambers that allow the use of several types of fuels. All these improvements over the stock heads are in place to increase the airflow. The more air the engine can ingest, the more power it can make. There are a bunch of options Brodix offers on these heads like 58-74cc CNC chambers, and just about anything else your deviant mind can think up, so keep that in mind when ordering. The Brodix kit comes with a dual plane intake big enough to support the heads, and for a small extra fee match ported as well.

For the valvetrain, John went with components from Lunati's Voodoo line, most notability a solid roller cam. John has always used hydraulic cams in his street motors, but wanted to try a solid roller this time. The cam spec's out at 0.555-int./0.566 exh. lift, 261 int./267 exh. advertised duration, 231 int./237 exh. duration at 0.050, with a 110-degree lobe center. He coupled the cam with a set of vertical bar roller lifters and 1.5 ratio Voodoo aluminum roller rockers. John went with this combo to be safe, not knowing how much piston to valve clearance it was going to have with the GMPP stock pistons. During testing we found this cam to be too small, but more on that later.

To feed the new heads, one of Holley's 750cfm Ultra Double Pumper street/strip carbs was tasked with fuel delivery. It's a 4150 design, but has black anodized billet aluminum metering blocks and base plate, mechanical secondaries, and surprisingly enough, an electric choke-not something normally found on a double pumper. To provide the spark, a ready to run billet HEI distributor from MSD was called to action. Since firewall clearance is not an issue, going with the coil-in-cap design and modern electronics were a no brainer. To assemble all of John's goodies and tune the engine on the dyno, we enlisted the help of the Speed-O-Motive crew in Covina, California. Don't get us wrong, we made John get his hands dirty on this project, but Jeff Strech from Speed-O-Motive also got involved. It was like watching an NHRA pit crew ripping down a motor between runs.

FLOW CHART (CFM@28-INCHES H2O)
FOR THE IK (IRON KILLER) 180CC HEADS
Valve Size Lift 0.200 0.300 0.400 0.500 0.600
2.02 Intake 138 188 234 243 245
1.60 Exhaust 112 149 167 175 178

BEFORE
RPM HP TQ
3,500 239 359
3,600 252 367
3,700 261 371
3,800 269 372
3,900 276 372
4,000 284 373
4,100 290 372
4,200 295 368
4,300 299 366
4,400 305 364
4,500 311 363
4,600 316 361
4,700 319 357
4,800 323 353
4,900 326 349
5,000 331 347
5,100 330 340
5,200 335 338
5,300 332 329
5,400 332 324
5,500 331 316
AFTER
RPM HP TQ
3,500 248 373
3,600 261 381
3,700 268 381
3,800 278 384
3,900 284 383
4,000 291 383
4,100 294 377
4,200 300 375
4,300 301 368
4,400 306 365
4,500 310 362
4,600 317 362
4,700 324 363
4,800 330 361
4,900 338 362
5,000 343 360
5,100 346 356
5,200 349 352
5,300 350 347
5,400 352 342
5,500 356 340
5,600 355 333
5,700 359 331
5,800 359 325
5,900 359 320
6,000 362 316

SOURCES
MSD IGNITIONS
El Paso
915-857-5200
www.msdignition.com
Holley
1801 Russellville Road
Bowling Green
KY  42101
270-781-9741
www.holley.com
Brodix
301 Maple P.O. Box 1347
Mena
AR  71953
479-394-1075
www.brodix.com
Speed O'Motive
131 N. Lang Ave
West Covina
CA  91790
626-869-02__
www.speedomotive.com
GM Performance Parts
P.O. Box 33170
Detroit
MI  48232
800-577-6888
www.gmperformanceparts.com
  • «
  • |
  • 1
  • |
  • 2
  • |
  • View Full Article
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
Super Chevy