Tri-Power 427
|
The machining process gets going with the block being bored with a Kwik-Way FL boring bar. An interchangeable carbide bit does the cutting. Six passes and 45 minutes are needed to completely bore each cylinder. After the cutting is complete Pecos measures the bore size with a dial bore gauge to verify the press fit--the hole in the block is 2.5 thousandths smaller than the sleeve, the interference fit is what will hold the sleeve in the block. An incorrect size will cause water leakage issues. View Related Article
|
|
Chevy Malibu Research
With great deals and authoritative reviews, find all you need to research and buy the new Chevy Malibu, as well as compare it with other vehicles to help you in your car buying process. The 2010 Malibu is offered with your choice of L4 engine, and can seat 5 people comfortably. Also check out the Chevrolet Camaro and the Chevy Monte Carlo.
|
|