Super Chevy Magazine Homepage Super Chevy
Facebook Click here to find out more!

Small Block Chevy Intake, Carb, Camshaft Testing - Danger Mouse Part 4

New Manifold Gives A Big Boost

By Mike Petralia
  • Chevy Small Block Testing Comp Cams
    Finally, we wanted to see if the engine needed even more, so we installed the next larger COMP Cams XE camshaft. Like the spacer, it added top-end power and sacrificed low-end. That's typical of any part at this level. As you try to gain more peak power, you lose low-end.
    Chevy Small Block Testing Comp Cams
    Finally, we wanted to see if the engine needed even more, so we installed the next larger
  • Chevy Small Block Testing Harmonic Balancer
    Once again, we used the Fluidampr balancer to degree the cam by checking the intake valve opening point at 0.006-inch lift. It's a lot easier than hooking up a degree wheel and almost as accurate.
    Chevy Small Block Testing Harmonic Balancer
    Once again, we used the Fluidampr balancer to degree the cam by checking the intake valve
  • Chevy Small Block Testing Oil
  Test 8 Test 9 Test 10 T10 Test 11 Test 12
RPM TQ HP TQ HP TQ HP HP TQ HP TQ HP
2600 384 190 393 194 411 203 +7 403 200 396 196
2800 386 206 395 211 413 220 +9 408 218 404 215
3000 398 227 403 230 420 240 +10 420 240 416 237
3200 408 249 413 252 430 262 +10 428 261 429 261
3400 410 265 416 269 436 282 +13 427 276 429 278
3600 411 281 415 284 438 300 +16 432 296 435 298
3800 413 299 416 301 437 316 +15 436 315 437 316
4000 410 312 414 315 437 333 +18 437 332 438 334
4200 407 325 408 327 435 348 +21 430 344 436 348
4400 402 337 402 337 429 359 +22 426 357 432 362
4600 394 345 394 345 421 369 +24 420 368 424 371
4800 384 351 386 352 411 376 +24 412 376 417 381
5000 373 355 373 356 398 379 +23 399 379 405 386
5200 358 355 359 355 380 376 +21 384 380 389 385
5400 345 355 346 356 365 375 +19 367 377 375 386
5600 331 353 331 353 347 370 +17 351 374 360 384
Max 413 356 418 356 438 380 +24 437 381 438 386
Avg 395 292 398 294 416 315 +21 414 314 416 316

Send your test suggestions to:
Super Chevy Magazine
Attn: Danger Mouse
720 Hundley Way
Placentia, CA 92870
Or Email: mikepe@mcmullenargus.com

SOURCES
Carb Shop
Ontario
CA
9-09/-947-3575
customcarbs.com
Mr. Gasket Company
10601 Memphis Ave., #12
Cleveland
OH  44144
216-688-8300
www.mr-gasket.com
COMP Cams Summit Racing Equipment
P.O. Box 909
Akron
OH  44309
Demon Carburetion
Dahlonega
Ge
7-06/-864-8544
barrygrant.com
Westech Performance Group
11098 Venture Dr., Unit C
Mira Loma
CA  91752
9-09/-685-4767
www.westechperformance.com
Edelbrock
Dept. 5.0
2700 California St.
Torrance
CA  90503
310-781-2222
www.edelbrock.com
Wilson Manifolds
4700 NE 11th Ave.
Ft. Lauderdale
FL  33334
954-771-6216
www.wilsonmanifolds.com
Fluidampr
Springville
NY
7-16/-592-1000
fluidampr.com
By Mike Petralia
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!

*Please enter your username

*Please enter your password

*Please enter your comments
Comments:
Not Registered?Signup Here
(1024 character limit)
Super Chevy