Related Photo Galleries
4 The rusty old exhaust was laid next to the new Pypes system to get an idea on length and fitment for the placement of the mufflers and crossover. Not seen are the included clamps and hangers that came with the kit. Up front are optional 3.5- to 3-inch reducers (304 polished stainless (PN PVR13S) that are 12 inches long so they can be cut to length if necessary for X-pipe placement/fitment with the transmission crossmember. The back pipes are also extra long for placement/fitment of the mufflers. This special X-crossover kit (PN XVF 13) will provide additional ground clearance when compared to Pypes' universal X-crossover kit.