Firm Up Your Rearend
Once the old leaf springs have been removed, it's time to clean up the bushing holes and install the new Hotchkis urethane bushings in the rear. This shot is looking toward the rear of the car from underneath. Use the supplied grease to lube the bushings and press them in as far as you can. I used one of the new shackle bolts with some big diameter washers and tightened it down to press the bushings in the rest of the way. Once that was done, I was able to hang the new leafs from the rear of the car by installing the new rear shackles. View Related Article
|
|