Super Chevy
Click here to find out more!

Tri-Five Big-Block Install - Fat Rat In A Little Hole

Droppin' In A 572-inch Monster

By Dakota Wentz, Photography by Dakota Wentz

It seems as if during every commercial break, at least one company throws out the "We're the leader in today's technology" type of line. Is it true? We have no idea; after all, what do we know about the molecular anatomy of fabric softeners? Get us in the auto industry and we have a pretty good idea of who's trailblazing. One such shop is D&P Classic Chevy in Huntington Beach, California.

Owner Darryl Nance and crew are always up on the latest trends, especially when it comes to '55-'57 Chevys. In short, Tri-Fives are D&P's forte. More Tri-Fives roll through the doors of D&P than 18-year-olds at the beach on a Friday night. Whether it's a top-of-the-line suspension, A/C installs, LS1 motors, big brakes, or a hula dancer on the dash, D&P has ventured in all areas. But just like the commercials, once you think everything has been tackled, something new pops up.

Because Tri-Fives are such hunks of mass it takes a lot to get them up and moving; for that reason one of the more popular setups for Tri-Fives is to drop in a GM Performance Parts 502 Ram Jet motor. The popularity of the 502 over the past few years has prompted aftermarket manufacturers to develop parts to make the swap just another day in the driveway. However, since GMPP has recently released the 572 crate motor, it's a different story. It's not that it couldn't be done, but picking up a catalog and ordering the parts to bang it out just wasn't possible-until now.

Technically, dropping a GMPP 572 is just like any other motor swap, but the problem is the 572 is big and space is limited, so there are a few trouble areas. One of the biggest concerns on stuffing the giant-sized Rat in a car is what to do about headers. The 502 headers won't fit the 572 motor, and on top of that, there isn't much room to work with around there. To help solve the problem, Darryl contacted Doug's Headers. Together they designed a header that will not only fit the application, but actually works, too.

Another obstacle was the oil pans. You have to find an oil pan that not only fits the motor but won't interfere with the crossmember, steering racks, and who knows whatever else. Once again, the aftermarket industry has stepped up. Milodon now offers an oil pan that bolts right up to the 572 with no modifications necessary to drop the motor into a '55-'57 Chevy.

Finally, the last step of dropping a 572 is blistering the firewall. Because the 572 has a bigger mass than the 502, it doesn't quite fit in the engine bay. Right where the valve covers meet the firewall, blisters need to be fabricated into the sheetmetal. Skill-wise, the hardest part of the swap is fabricating the blisters. But on the flip side, making things easier is that with D&P, this swap is just a few phone calls away. You can simply give D&P a buzz and they can ship you the new headers and oil pan; as for the motor you're gonna have to call GMPP. If you're mechanically challenged-or short on time-D&P will do the entire install for you. To get a bird's-eye view of what it takes to drop in the new 572, we took a trip down to D&P's place of business where they were in mid-throw of dropping GM's biggest Rat into a customers '56 Bel Air. Check it out!

Other than what has been pointed out here, dropping in a 572 is just like dropping in any motor. All that's left to do is install fenders, core supports, grille, and all the other stops along the way. Then it's time to hit the streets and light 'em up!

SOURCES
D & P Classic Chevy
18392 Enterprise Ln. # 1, Dept. SC
Huntington Beach
CA  92648
By Dakota Wentz
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
Super Chevy