Super Chevy Magazine Homepage Super Chevy

Dart Small Block Head Studs

Prev  Next
Dart Small Block Head Studs

Dart Block Super Build Up - Building A Hell-Raiser, Part 2
ARP cylinder head studs complete with 12-point nuts are used for the ultimate in strength (PN 234-4301). Once the studs are installed, Anthony DiSomma slides the AFR 227 cylinder head in place-but not before the Fel-Pro MLS (multi-layered steel) cylinder head gasket is in place. The MLS gasket (PN 1143) is a must in any boosted or nitrous application for the ultimate in sealing. Our head gaskets check in at .040-inch thick, which must be factored in when determining static compression. Fel-Pro was called upon to supply all of the gasket needs of Project True SStreet. View Related Article
Dart Small Block Engine Side Dart Small Block Mls Gasket Dart Small Block Head Studs Dart Small Block Cylinder Head Dart Small Block Cnc Machine Exhaust Port Dart Small Block Dyno Chart Dart Small Block Harmonic Balancer
Dart Small Block Balancer Dart Small Block Super Victor Intake Dart Small Block Edelbrock Intake Manifold Dart Small Block Solid Roller Lifter Dart Small Block Dykem Dart Small Block Rocker System Dart Small Block Pushrods
Dart Small Block Billet Race Pump Dart Small Block Msd Crank Trigger Dart Small Block Moroso Billet Electric Water Pump Dart Small Block Moroso Oil Pan Dart Small Block Distributor Dart Small Block Blower Brackets Dart Small Block Carburetor
Dart Small Block Supercharger Dart Small Block Dyno Operator Dart Small Block Valve Cover Dart Small Block Procharger Dart Small Block Dyno Setup

 

Get Adobe Flash player