Yeah, that's right. We are up at Smeding Performance in Rancho Cordova, California. Bill Jenkins and Ben Smeding have teamed up together to custom build a 572 cubic inch big block. A limited number of these signature series power houses will be available very soon. Of course we do not want to spoil the story before it appears in print. Let's just say that this angrily cubed engine will be running on the north side of 700 horse power, pump gas and ready to go out of the box. Stay tuned for the full story in Super Chevy Magazine. Several different dyno tested combos were run that weekend. Ben And Bill are looking for bigger and better gains with each swap.Several different dyno tested combos were run that weekend. Ben And Bill are looking for b After a few pulls, everyone gathered around the screen to check the results. Dyno tuner Chad Martin is happy with the results of the pull. Of course we can't reveal that here. Wait till the magazine comes out.Dyno tuner Chad Martin is happy with the results of the pull. Of course we can't reveal th By Mike Harrington Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
