Super Chevy
Click here to find out more!

Heads, Cam, and Ignition Testing on a Small Block Chevy - Danger Mouse Part 24

Testing Edelbrock's E-Tec 200 Heads

By Mike Petralia

CLICK BELOW TO SEE ALL OF THE STORIES COVERING THE BUILD OF PROJECT DANGER MOUSE

DANGER MOUSE PART 1

DANGER MOUSE PART 3

DANGER MOUSE PART 4

DANGER MOUSE PART 5

DANGER MOUSE PART 7

DANGER MOUSE PART 8

DANGER MOUSE PART 9

DANGER MOUSE PART 10

DANGER MOUSE PART 13

DANGER MOUSE PART 14

DANGER MOUSE PART 15

DANGER MOUSE PART 18

DANGER MOUSE PART 20

DANGER MOUSE PART 22

DANGER MOUSE PART 23

DANGER MOUSE PART 24

DANGER MOUSE PART 25

Pt. 27 - It's A Very Stout Combination
Last month Danger Mouse (DM) went on a really big power trip running a Weiand Hi Ram, twin Holley 650s and a custom solid roller cam from Lunati. Those parts netted some awesome power figures, but they'd be pretty radical on the street. So we figured right now would be a good time to get back to basics and test some of the hottest new street stuff we could get our hands on.

In this month's test, Test 44, even though we'd downsized the components substantially, we still made a lot of power, which gives massive credit to the science behind the products involved. In the past we've tested many different size cylinder heads on DM, but Edelbrock's E-Tec's are the first heads we've used with 200cc intake runners. Not to confuse the issue, but Edelbrock also makes a 170cc version of this head, which is better suited to low-end grunt and we'll be bolting a set of those on DM next month to see how they compare. This time around, we wanted to see how much power the 200cc heads could cook up and the results were delicious.

Heads Affect Power
What is it in cylinder heads that can make one set produce tremendous power, while another set flops? The truth is in the design, but we're not just talking about port shapes and volumes here. Everything from port entry to exhaust short-side radius to combustion-chamber shape to the ratio between intake and exhaust flow plus about a billion other things all have an effect on the power a head can produce.

Edelbrock has a serious advantage over a lot of other cylinder head companies in that they've been making induction systems practically since hot rodding was invented, and they've learned a thing or two about how to get the most from the least. But, there's even more to it than that. You could take the best cylinder heads in the world and combine them with the wrong cam or a mismatched intake manifold and your engine would totally tank. That's why research is so important and that's why we're doing this stuff for you.

When planning your next engine project, don't just talk to your buddies, read about what's going on and see what kind of power has been made with some of the parts you're thinking about. With all the magazine dyno testing going on today, it'd be hard not to find the perfect combination spelled out for you in black and white in the pages of a magazine somewhere, hopefully in SUPER CHEVY.

Hr Cam Technology
The real deal this month is that we properly matched the camshaft to the heads, to the intake manifold, to the carburetor, to the ignition, to the headers, and out the exhaust. This is something we've been preaching all along with DM and can't stress the importance of enough. It was pretty easy this month, since all we had to do was pick up Edelbrock's catalog and order several key components right from it.

Even though Edelbrock does not call the hydraulic roller cam we ran this month a "matched" grind to the E-Tec heads and manifold, we knew from its specs that it would work very well. The lift and duration figures were right in the middle of the pack, not so big that they'd make the engine unruly on the street and not so small that they'd wimp out on the track. In fact, this cam, heads, and intake package produced a very broad torque curve rivaling any of the best DM has made in the past. And the 485 peak hp it delivered tells us that this thing can really scream.

Second Strike Technology
There was another power player this month and it was his second time sitting at the table: the Pertronix Second Strike ignition box. The last time we tried some stuff from Pertronix was in our high-compression tests back in DM Pt. 23. That's when we'd hooked up a Pertronix Plug-N-Play distributor and the Second Strike box and poured in some 105-octane race gas. We didn't talk too much about the Second Strike's results at that time because its testing was done on race gas and we wanted to keep concentrating on the pump-gas performance.

But the results were undeniable, the Second Strike box added power, especially in the mid-range. We figured this month's test would be the perfect time to reintroduce the Second Strike box into DM's regime and share the results with you. Without the Second Strike box connected, running just the Pertronix distributor and coil, DM pulled off what we thought were some good power numbers. But connecting the Second Strike box and playing with its crank angle offset (C.A.O.) we were able to tune in another 10-plus ft-lb of torque throughout the entire rpm range! And all of it was done without any other ignition box or accessory hooked up, meaning this is truly a plug-in-and-make-power system.

Dyno Testing Part 27
Danger Mouse specs for Part 27 - Test 44:355 cid, 10.0:1 cr, 4.030-bore 4-bolt Motown block, 3.48-stroke Lunati crank, 5.7-inch Lunati rods, Lunati flat-top forged pistons, Speed-Pro moly rings, Edelbrock E-Tec 200 heads (64cc chambers, 200cc runners, 2.02" intake valves, 1.60" exhaust valves), Edelbrock Super Victor Vortec intake manifold, Edelbrock Performer RPM hydraulic roller camshaft installed at 105-degree intake CL (234/238 @ .050, 296/300 adv, .574/.584 lift w/ COMP 1.6:1 rockers, 112 LS), 36 total advance, 91-octane. Tested on Speed-O-Motive's DTS dyno.

We're always looking for new ideas. Do you have a better one for Danger Mouse?
Send your test suggestions to:
Super Chevy Magazine
Attn: Danger Mouse
720 Hundley Way
Placentia, CA 92870
Or e-mail: terry.cole@primedia.com

DANGER MOUSE COMPONENTS FOR PART 27
CAM EDELBROCK HYDRAULIC ROLLER (PN 2201)
CARB MIGHTY DEMON 650 (PN 5282010 GC)
GASKETS MR. GASKET
HEADS EDELBROCK E-TEC 200 (PN 60989)
IGNITION PERTRONIX DISTRIBUTOR, SECOND STRIKE BOX
LIFTERS CRANE HYDRAULIC ROLLER (PN 119681)
MANIFOLD EDELBROCK SUPER VICTOR VORTEC (PN 2913)
PISTONS LUNATI FLAT-TOP FORGINGS
ROCKERS COMP CAMS 1.6:1 PRO MAGNUM (PN 1302-16)
Test 44
RPM TQ HP
2600 351 174
2800 370 197
3000 377 215
3200 380 232
3400 383 248
3600 392 269
3800 400 289
4000 403 307
4200 407 325
4400 413 346
4600 423 371
4800 432 395
5000 436 415
5200 435 431
5400 432 444
5600 427 455
5800 421 465
6000 415 474
6200 409 483
6400 398 485
Max 436 485
Avg 405 351
  • «
  • |
  • 1
  • |
  • 2
  • |
  • View Full Article
By Mike Petralia
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
Super Chevy