Super Chevy
Click here to find out more!

Mast Motorsports Crate Engines - Positioned For Power

The Crew At Mast Motorsports Tackles LS Technology Head-On While Putting Up Some Impressive Numbers.

By Dan Ryder

Life is an ongoing maze of decisions. Some are fortunate enough to make all the right turns, open the proper doors, and duck at the appropriate times. Others, well let's say if some got paid for bad luck, they would be millionaires by now. Having to make relevant decisions usually starts before final dismissal from high school.

Fortunately for the four young men who started Mast Motorsports, they have efficiently worked through the maze at this point, three of them graduating from Texas A&M University with Bachelors degrees in Mechanical Engineering, and all coming together to carry out a mission. This mission includes bringing top-notch ingenuity and reliability to the already crowded aftermarket. After all, this love for the automobile did not start with a calculator in hand; it started with a young man and a vision.

While still in high school, Horace Mast took a liking to the automotive engine and spent numerous hours working on his diesel truck. After almost tripling the horsepower output of the engine, it was a no-brainer that this was his passion and destiny.

While still in college, Horace was part of a program that pooled mechanical engineering students from around the world to compete in the design and construction of smaller scaled open wheel racecars.

During the Formula Society of Automotive Engineers competition, engineering students from their respective schools build the car from the ground up-designing, manufacturing, and testing each component. Not only does this teach by letting student get their hands dirty, but it also allows the students to network with the American automakers (Chrysler, GM, and Ford).

In order to shed weight from the car, Horace designed a single-cylinder supercharged engine. This particular unit produced the same power output of the previous four-cylinder unit, with the added benefit of shedding 75 pounds in the process (lighter is faster). The A&M car competed in two international FSAE competitions in 2006, winning first place in the FSAE West competition at California International Speedway over a field of 75 cars.

After deciding not to pursue a career with one of the Big Three automakers, Horace got together with a few close friends and fellow graduates, and they decided to put their knowledge to use and begin Mast Motorsports.

Mast Motorsports began its life out of a small office, with engines on stands next to desks and computers. Horace began selecting hardware components for a proprietary aftermarket tunable ECM. This would not be your standard stand-alone unit, but a versatile unit used to control many high-end functions such as DBW technology (Drive By Wire).

Beyond the construction of this ECM, Horace was intrigued by the technology being used called VVT (Variable Valve Timing). Mast figured he could gain massive amounts of power through technology rather than swapping out a boatload of aftermarket parts. While the addition of aftermarket parts will aid in gaining gobs of power, it may hurt drivability, fuel consumption, emissions, and, most of all, your pocket. Mast is trying to keep these issues to a minimum, while providing long lasting reliability and a thrill behind the wheel.

Mast Motorsports spends hours on top of hours performing tests on its engine dyno, ensuring that all bases are covered. Mast has developed its M-90 ECM, along with multiple wiring harnesses (which meet or exceed OEM quality). Mast will first enter the aftermarket with its turnkey crate engines, complete from soup to nuts. All crate engines will leave the facility pre-tested and fully tuned for your specific application. Whether it's a full-bodied killer or a sand rail, Mast has you covered.

By Dan Ryder
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
Super Chevy