Super Chevy
Click here to find out more!

Testing Comp Cams' VVT Camshaft in an L99 Camaro

Variable Valves Gone Wild - Testing Comp Cams' high-lift VVT camshaft in a fifth-gen L99 Camaro.

By Justin Cesler, Photography by Justin Cesler

When Chevrolet announced that the fifth-generation Camaro would come with two different V-8 engine depending on what transmission the customer ordered, many enthusiasts were a bit confused. The LS3, rated at 426hp, would ship with six-speed manual Camaros, and sport a traditional LS configuration and a fair amount of horsepower. Automatically shifted V-8 Camaros were to be equipped with an L99 LS engine that took the LS3 configuration and added Active Fuel Management (AFM) and Variable Valve Timing (VVT), but also reduced power to "only" 400hp. AFM is the General's way of switching the L99 between running on all eight cylinders—as we are all used to—and running on only four cylinders to increase gas mileage, which, for most of us, is nothing more than an inconvenience. VVT on the other hand, well, that phases the camshaft in real time to create impressive torque down low, paired with increased horsepower up top.

Now, if you're thinking that the addition of new technology would help power and make the L99 a better engine, you're somewhat correct. But, sometimes the peak numbers just don't tell the entire story. You see, VVT is actually a great advance in pushrod V-8 technology, as it allows tuners and engine builders to manipulate the camshaft phasing throughout the powerband to create a nice torque curve. No more "flat on the bottom, big power up top" stuff here; it's "killer torque down low and big power up top" with the right setup. And you can see this in the power ratings, where the lower compression, smaller camshaft equipped L99 is rated within 10 lb-ft of torque compared to the LS3, which shows how well cam phasing works.

Of course, where the factory may have fallen a bit short in power and performance, the aftermarket has made great strides. The genius team of engineers at Comp Cams have been working hard since day one to create a line of VVT specific camshafts that work with the existing system to maximize horsepower and torque output, while keeping the L99 engine trouble free and sophisticated.

Comp Cams offers several high performance camshafts for the L99, with everything from a mild duration upgrade to a more aggressive bumpstick for racers, and we naturally ordered the largest one they offered. With 218/222 degrees of duration, 0.566/0.578 inches of lift, and a 114-degree lobe separation, the Comp Cams 189-403-13 camshaft selected for this build is "aggressive" by VVT standards, but really quite mild for a typical street driven LS3-style build. Additionally, we had Comp send us a set of standard LS hydraulic roller lifters (PN 850-16), hardened 7.400-inch pushrods (PN 7955-16), dual valvesprings (PN 26925TS-KIT), and a Comp Cams phaser limiter kit (PN 5460) to tame the VVT phaser movement. Additionally, we chose to upgrade the factory rocker arms with Comp's rocker arm trunion kit (PN 13702-KIT), which is something everyone should consider when installing a new camshaft.

With parts in hand, we teamed up with the crew at Vengeance Racing in Cumming, Georgia, to follow along with the installation on an already mildly modified fifth-gen Camaro. The Vengeance team is no stranger to the high-performance LS world, and was able to complete the entire installation in no time, without any headaches. At home, this would be a difficult—but not impossible—installation, as the heads do have to be removed in order to delete the AFM system. However, when we hit the dyno, the results spoke for themselves…

1

Vengeance Racing's L99 equipped Camaro came into the shop running a cold-air intake system, long-tube headers, and a cat-back exhaust. Baseline dyno runs recorded 365.37 rwhp and 382.77 lb-ft of torque to the rear tires, which showed the engine was in tip-top shape and running well prior to our installation.

2

Comp Cams has worked hard to develop Variable Valve Timing (VVT) compatible camshafts for the L99 LS engine, and their complete kit includes a VVT specific camshaft, a set of 16 hydraulic roller lifters, high-lift compatible valve springs, a set of 7.400-inch hardened pushrods, and a cam phaser limiter kit.

3

With four camshaft profiles to choose from in the existing VVT lineup, we naturally picked the largest of the bunch, part number 189-403-13. At .050-inches, the 275PIIHR144 grind runs 222/236 degrees of duration, .566/.578 inches of lift, and a 114-degree lobe separation angle. Somewhat aggressive by VVT standards, this camshaft was cut to promote modest power gains without giving up drivability on the street.

4

Vengeance Racing technician Joseph Johnson (Joe) wasted no time digging into the fifth-gen's engine bay. With the coolant drained and the factory water hoses removed, Joe pulled the radiator out of the way. Of note, the factory transmission cooler lines must also be disconnected prior to removal, which is a simple pull and hold job.

5

With the radiator removed, Joe had plenty of room to work on the front of the L99 engine. The next step was to remove the factory water pump. With the belt removed, Joe loosened the pump from the block and pulled it out of the way. Don't forget about the two heater hoses attached to the side.

6

Next, it was time for the balancer to go. Using an LS-specific pulley removal tool and an air-powered impact, Joe pulled the balancer and carefully set it aside. Like most of the front engine components, the balancer will be reused, so make sure to keep it in good shape if you're doing this at home.

7

The timing cover attaches to the front of the L99 with eight perimeter bolts and two lower oil pan bolts. Those lower two bolts, which go into the timing cover vertically, can be difficult to access without a slim ratcheting wrench, but you can get to them with some patience.

By Justin Cesler
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
Super Chevy