When installing the new water pump setup, we made sure to use Teflon on our bolts. Always use the proper gear when required. Here it's clear to see that the CNC-machined parts are top-notch. Before installing the Concept One alternator bracket and arm, some mild assembly is required. The arm needs to be fastened to the brackets. Because we are dealing with an engine accessories install, our parts are going to see some hot temperatures. For that reason, we applied antiseize to our bolts. It may seem like tedious work, but it could save you a headache down the road. The alternator setup bolted right up with no hassle. Concept One has gone to great lengths to make sure the install goes as smoothly and effortlessly as possible. For those of you who are a little confused about Concept One's mini-reservoir power steering pump, here's a quick snapshot: The pump and reservoir is a standalone unit that can be used with stock pulleys or other aftermarket systems. (The piece can be used with a Concept One system, or it can be ordered separately and adapted to your current setup.) Each kit comes with an all-new Concept One aluminum power steering pump, a polished V-belt pulley, a polished block-mounted bracket, and Concept One's exclusive "Mini Reservoir," made from billet aluminum and polished to a show finish. The added cost? Less than a Benjamin. « | 1 | 2 | 3 | » | View Full Article By Dakota Wentz Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!