Here is everything we ordered from Be Cool to keep the temp down on this Chevelle. We ordered a bolt-in aluminum radiator that has both ports on the passenger’s side for an easy hook up to the LS water pump. Because of the port orientation, Be Cool made it a dual pass unit so the water goes through the entire radiator, not just straight down the passengers side tank. For airflow we opted for the dual 11-inch fans with stainless mounting brackets, since this car will see a lot of hard use followed by sitting still. An aluminum vented recovery tank will catch any coolant that might expand past the Be Cool cap. Lastly is a 5-gallon pail of Be Cool’s Be Coolant to fill the system once we are ready.