Yeah, they look sweet, but more importantly these new TIG-welded tubular control arms from Classic Performance Products (CPP) are much stronger than what was put in the '67 over 40 years ago. The arms are made from 1.25-inch 0.120 wall DOM tubing and have thick 1.5-inch 0.188 wall pivot barrels. This ensures the pivots stay true even under stress. They come preassembled on new billet chromoly 4130 cross-shafts and pivot sleeves. These sleeves capture both sides of the bushing, unlike the stockers that are only retained on one side. As a result, they're much stronger and better resist flex. As a safety measure they incorporate an interlocking shaft and sleeve design so that the bolts can't work loose. The fact that they came with new ball joints already installed saved us time.