Related Photo Galleries
1 For much-needed bite, we ordered the Slide-A-Link system from Competition Engineering (PN C2100), which is part of Moroso, a trusted name in performance . It's designed for use in Stock Eliminator and bracket racing, but as we found out, will make improvements towards a better, firmer ride and enhanced road holding on a street-driven car. Shown here are all the components needed for one side, along with the installation instructions and the Slide-A-Link wrenches (PN C2199). A solid front plate and bushing is installed inside the original front spring pocket and clamps to the leaf spring, creating a positive point for torque transmitted from the rear axle through the unique sliding link, cushioned by the urethane shock pad. Free travel and pre-load adjustments are made on the vehicle for street or strip use.