DSE provides the template necessary to properly locate the area that needs to be modified to accommodate the upper link mount.DSE provides the template necessary to properly locate the area that needs to be modified The Lincoln Electric Plasma cutter is called upon to open up the floor to make room for the upper link mount.The Lincoln Electric Plasma cutter is called upon to open up the floor to make room for th The DSE upper-link mount is fitted and trimmed for final welding. The starting platform for PAH2 was a solid '69 Camaro shell, simplifying the installation of the DSE Quadra Link.The starting platform for PAH2 was a solid '69 Camaro shell, simplifying the installation The template is laid out on the rear seat floor and taped in place. Matt Duque makes cut marks as located by the template.The template is laid out on the rear seat floor and taped in place. Matt Duque makes cut m The template is also used on the passenger side, marked, and cut out. Matt MIG-welds the upper mount in place. Both upper-link mounts are also welded from underneath to ensure optimal strength. The rear coilover mount is located and readied for welding. The rear coilover mount is Welded to the Camaro trunk and passenger floor areas. From the centerline of the rear, as per the instructions, Matt measures out the distance to the center of the coilover bottom mount bracket.From the centerline of the rear, as per the instructions, Matt measures out the distance t A section of the trunk floor is cut to make room for the rear coilover mount. Panhard bar mount is fitted to the passenger-side rear frame rail and also cleaned up for welding.Panhard bar mount is fitted to the passenger-side rear frame rail and also cleaned up for The Strange Engineering S60 is set up on jackstands level, then set at minus 3-degrees pinion angle. Matt finds the centerline of the housing.The Strange Engineering S60 is set up on jackstands level, then set at minus 3-degrees pin The DSE instructions are absolutely thorough and well illustrated. « | 1 | 2 | 3 | » | View Full Article By Arvid Svendsen Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
