 The DSE provided dimension...  The DSE provided dimension for the center point of the coilover bracket is 14 3/4 inches. |  With the centerline determined...  With the centerline determined for each bracket, Matt does some simple math and locates both brackets. |  Bracket is tack-welded to...  Bracket is tack-welded to the housing. |
 The DSE provided measurement...  The DSE provided measurement from the center of the housing to the centerline of the link bracket is 19 5/8 inches. |  Angle locater is placed on...  Angle locater is placed on links mounting bracket, and set at a 90-degree angle. |  The bottom of the coilover...  The bottom of the coilover bracket is set at zero degrees. Keep in mind that both upper- and lower-end links feature adjustability for ultimate suspension tuning. |
 The coilover bracket is welded...  The coilover bracket is welded to the housing. |  The DSE lower link bolts to...  The DSE lower link bolts to the DSE mounting bracket that is bolted in at the OEM leaf spring front mounting perch. |  In Matt Duque's words, this...  In Matt Duque's words, this rear suspension is "definitely the strongest setup I've seen-a stout piece that will definitely deliver the torque to the rear wheels." |
 The rear is placed on a floor...  The rear is placed on a floor jack, and lifted in place, with special attention given to lining up the upper and lower four link bars. |  Panhard bar and Koni coilovers...  Panhard bar and Koni coilovers are bolted in at this time | |