The Fatman spindles accept all performance braking system components, so the Wilwood caliper brackets were a direct bolt on.The Fatman spindles accept all performance braking system components, so the Wilwood calip After unpacking the Wilwood system and making sure all the components were in place, we assembled the hubs and discs. Wilwood supplies a complete and thorough instruction sheet that makes assembly a straightforward operation.After unpacking the Wilwood system and making sure all the components were in place, we as Once both units are assembled, the brake discs are attached to the hub assemblies and the bolts tightened to spec.Once both units are assembled, the brake discs are attached to the hub assemblies and the An extremely important aspect of the Wilwood assembly is safety wiring of the hub components. There are tips included in the instructions and a more in-depth explanation on the Wilwood Web site.An extremely important aspect of the Wilwood assembly is safety wiring of the hub componen This image shows a nearly completed example of a safety wired assembly. Once the bearings and grease seals are installed the finished rotors are then installed onto the spindles, the calipers attached to the brackets, and the pads and brake lines in and connected, the job is pretty much complete. Next time we'll show you what we did to the rear suspension to bring it up to par with the front, and we'll get back to the track for some final testing and comparison to our baseline performance.Once the bearings and grease seals are installed the finished rotors are then installed on SOURCES Fatman Fabrications 704-545-0369 www.fatmanfab.com Classic Performance Products 175 East Freedom Avenue Anaheim CA 92801 800-522-5004 www.classicperform.com QA1 800-721-7761 qa1.net WILWOOD ENGINEERING 4700 Calle Bolero, Dept. SC Camarillo, CA 93012 « | 1 | 2 | View Full Article By Jim Rizzo Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
