Dynamat Xtreme conforms and fuses easily to sheetmetal and other hard substrates. Before we started cutting and peeling, a quick mock-up and layout was in order. The Dynamat was spread out so we could see how much we had to use and where it had to be cut.Dynamat Xtreme conforms and fuses easily to sheetmetal and other hard substrates. Before w Oh yeah, don't forget to use this handy dandy roller. Once the adhesive backing is peeled, this roller helps push it into the floor's contours.Oh yeah, don't forget to use this handy dandy roller. Once the adhesive backing is peeled, If air pockets form, an incision with a razor blade solves the problem rather easily. The same also applies to threaded holes in the floor and body plugs. Nothing a little cutting can't fix.If air pockets form, an incision with a razor blade solves the problem rather easily. The Dynamat is extremely easy to work with. A half hour later nearly the entire floor of the El Camino was covered. This insulation will do wonders for minimizing road noise and eliminating unwanted vibration.Dynamat is extremely easy to work with. A half hour later nearly the entire floor of the E Dynamat isn't just for floors and doors--check out this nasty rat's nest of insulation in the headliner. Sure, it was decent 36 years ago, but now it's time to go.Dynamat isn't just for floors and doors--check out this nasty rat's nest of insulation in Wow, after all the sneezing was over from pulling out the dusty old liner, a quick cleanup was in order and the Dynamat stuck to the ceiling like flypaper.Wow, after all the sneezing was over from pulling out the dusty old liner, a quick cleanup The ceiling and the floor of the cab are now covered and ready to keep things quiet. On the firewall itself, we decided to stick with the OE-type insulation from Year One. This saved us time cutting access holes in the Dynamat for all the wiring, linkage, and cables coming from the engine compartment.On the firewall itself, we decided to stick with the OE-type insulation from Year One. Thi SOURCES Harrison's Restorations Dynamat 3042 Symmes Rd. Hamilton OH 45015 513-860-5094 www.dynamat.com Langeman Manufacturing Year One PO Box 129 Tucker GA 30085 800-932-7663 770-496-1949 www.nextgenparts.com/mustang « | 1 | 2 | View Full Article Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
