nce a year, the big players of the automotive aftermarket congregate in the Las Vegas Convention Center for the Specialty Equipment Market Association (SEMA) trade show. Companies bring out high-end project vehicles and new products. This year's SEMA show did not disappoint, with over 1,500 new products on display smack dab in the middle of Sin City.
Good, bad, or indifferent, the SEMA show is not open to the general public, but we were there in full force. We walked what seemed like miles of booths, scouring each one looking for the best products that will help you turn your Bow Tie into a super Chevy. With so many products to inspect, we were hard-pressed to just pick a few, so we decided to give you a nice round number of 101 to whet your gearhead whistle. The information is quick and dirty, but should be enough to let you decide if you want to investigate further by contacting the company directly. So grab a drink, sit back in your favorite chair, and enjoy Super Chevy's Top 101.
Premier Disc Brake Conversion Kits
ABS Power Brakes is now offering a really big brake kit with 14.5-inch front rotors and 13-inch rears for most GM muscle cars. The rotors are complemented by custom-designed and built, four piston monoblock, lightweight forged billet aluminum calipers. With each piston measuring 2-inches, these calipers combine to generate four times the braking force of standard GM calipers. Requires 19-inch or larger wheels.
ABS Power Brake, Inc.
GM HEI Corrected Distributor Cap
The ACCEL Corrected distributor cap reroutes the firing order inside the cap eliminating crossed spark plug wires for a clean, uncluttered engine compartment.
SS9 Modular Hood
The ACS hood for the '10-and-newer Camaro features a domed cowl higher than the original, and is available with a choice of three interchangeable hood inserts to modify the look in minutes. It includes a clear window, heat extractor, and carbon-fiber inserts.
ACS Composite-Advanced Composite Specialties
Corvette Stealth Fuel System
Complete drop-in fuel pump assembly for '03-and-newer Corvette fuel tanks. This bad boy will support over 1,000 hp and incorporates the factory jet siphon system. It includes the pre-filter, bracket, and plumbing for a no-hassle install.
2010-Up Camaro Strut
This high-performance strut from AFCO is built specifically for the fifth-generation Camaro. It features a high-pressure gas design with velocity sensitive valving for improved handling performance. Coil over compatible, this strut allows for ride height adjustment and corner weight control. AFCO also offers caster camber plates for correcting front-end geometry when lowering.
TXR Modular Composite Intake
This new composite two-piece manifold from Air Flow Research for the SBC runs 30 degrees cooler, is 10 pounds lighter, and adds 15 hp over aluminum. Single- and dual-plane center sections are available and can be swapped out without pulling the distributor or draining the coolant, as the valley area stays in place. It also has LS-style rubber gaskets for leak-free sealing.
Air Flow Research
Comp Stick Kit 2010-Up Camaro
Add a touch of Hurst style and performance to your '10-and-newer Camaro's automatic transmission. This new Comp Stick not only replaces the shifter, but also the console cover and factory knob.
B&M Racing and Performance Products
2010-up Camaro Intake System
Airaid Filter Company offers the MXP intake systems for the '10-and-newer Camaro V-6 and V-8 LS3/L99 engines. The company claims these intakes add an additional 16 hp and 13 lb-ft for the V-8 engine, and 11 hp and 14 lb-ft for the V-6. Each kit comes with all the necessary hardware, easy to follow instructions, and the company's "No-Hassle" Warranty.
Airaid Filter Company
Classic Update Series Wiring Kit
The Classic Update series is a complete wiring system for the '62-67 Chevrolet Nova in a box. That means it includes everything you need to infuse your classic vehicle with modern wiring. In this kit you'll find headlight, dimmer and ignition switches, along with everything else needed.
OE Synthetic Motor Oils
Since oil drain intervals for many of today's vehicles extend well beyond the traditional 3,000-mile recommendation, Amsoil has answered the call. Its new oil is formulated to provide better wear control as well as high and low temperature protection. There are 5W-20, 5W-30, and 10W-30 viscosities available.
ARP Ultra-Torque reduces preload scatter and eliminates the need to cycle high-performance fasteners. It delivers more consistent, repeatable fastener tension pre-loads for true torque settings.
Super Damper for 2010-Up Camaro V-6
ATI Super Damper for the new Camaro V-6 features a 10-percent underdrive accessory pulley to free up horsepower. It has an aluminum shell and pulley with steel hub, plus it accepts a six-bolt supercharger pulley made by LPE.
ATI Performance Products
Prestige Series Gauges
New to Auto Meter's extensive lineup, these new gauges come in black or antique ivory, and feature hybrid spun metal dials with Hi-Def visibility and antique-style fully illuminated pointers. They come in two sizes: 3 3/8-inch for the tach and speedo, and 2 1/16-inch on all the others like oil, temp, and volts.
Auto Meter Products
Draft Billet steering Wheel
Billet Specialties Draft steering wheel is precision machined from 6061 T6 billet aluminum, with either a polished or hard coat black anodized finish; features your choice of nine top-grain leather colors for the half wrap and your choice of rivet finish. Horn buttons also have multiple finish options for a truly customized look.
Billet Specialties Inc.
EFR Line of Turbochargers
All EFR compressor covers have integrated CRV (compressor recirculation valve) ports and mounting. The CRV will allow users who need a blow-off valve to simply install a valve and a boost line. Creating the boost is a forged-aluminum, fully milled compressor wheel. The EFR line will be comprised of six billet compressor wheels ranging from 62mm to 91mm OD.
BorgWarner Turbo Systems
Chassisworks' g-Bar/g-Link systems for '64-72 Chevelles is an easy to install canted four-bar suspension set up that can be used with the stock rear end. The g-Bar system consists of three different combinations of upper and lower link bars, with your choice of coil-over shocks or air springs. These options create six different variations to better suit your performance needs.
Chris Alston's Chassisworks
ProContact with EcoPlus Technology
Continental Tire's new ProContact is an all-season tire that was developed to enhance driving pleasure and save money. The tire provides improved fuel efficiency, reduced CO2 emissions and an 80,000-mile limited treadwear warranty, without sacrificing wet braking performance.
Composite Instrument Panels
Classic Dash showed off a new molded ABS composite dash panel that replaces the original panel for the '90-92 Camaros. This Classic Dash panel is available in three finishes: carbon fiber, brushed aluminum, or black. All panels are offered in two forms: with or without gauge openings and with or without gauges.
Teak Steering Wheel Kit
The '63-66 Corvette teak steering wheel kit from Classic Industries is a quality reproduction of the original simulated teak plastic steering wheel. It includes the steering wheel, hub assembly, horn contact, and Bow Tie horn cap.
Classic Instruments just put the finishing touches on the company's new '63-65 Nova gauge cluster. It features an electronic speedometer, a tachometer, a quad gauge pack, turn and high beam indicators. It mounts directly into a stock bezel and even works with the stock 0-30 ohm fuel sending unit. Comes complete with all the necessary senders, wiring harness, and lens.
Classic Instruments Inc.
Modular Power Steering Box
Classic Performance Products is keeping prices down by building these modular power steering boxes. This one is for '62-67 Novas, but with a change of the bracket it can fit other applications. It has a 14:1 ratio for good response without being twitchy.
Classic Performance Products
Big Tube Bender
Bending 3/8-inch OD tubing can be difficult with a lightweight handheld bender, particularly when bending stainless steel tubing. This husky Classic Tube swivel handle bender (PN3820) can be repositioned anytime during a bend, which makes compound bends a simple, easy process. This tool will bend from 1-degree up to a full 180-degrees.
Muscle Car and Street Rod Oil
Comp Cams Muscle Car and Street Rod engine oil is formulated to provide protection and performance in engines that experience extended periods of storage. So now you won't have to worry about letting your pride and joy sit in the garage all winter.
The Secretaudio audio solution with handheld remote LCD display allows you to have modern audio capabilities without cutting up your dash. The system features an AM/FM radio with USB/iPod control, Sirius-XM satellite input, and remote CD changer control.
Custom Autosound Manufacturing Inc.
Starting with new class A tooling, then using top-quality steel and ending with the best quality American plating, these '57 one-piece smoothie bumpers are a true work of art. The bullet guards have been removed to give it a true smoothie look. A custom-style grille is also available to go with the bumper.
Chevy II Front Subframe
Detroit Speed's front subframe is a bolt-in replacement for the original stock unit on the '62-67 Chevy II. It improves handling and ride quality by utilizing DSE's unique suspension geometry. The frame comes complete with tubular control arms, coilover shocks, springs, power rack, splined sway bar, and C6 Corvette uprights. Up to a 9-inch wide wheel can be used without modifications.
Detroit Speed, Inc.
LSX 440 CID rotating assembly
New from Eagle is the 440 ci rotating assembly for GM LSX standard deck height blocks. It features a 4.125-inch stroke 4340 forged steel crank, 4.125-inch bore forged Mahle pistons for use with any LS-based head, and 4340 steel H-beam rods.
Eagle Specialty Products
Hybrid Analog/Digital Instrument Systems
The VHX series from Dakota Digital combines benefits of digital and analog instrumentation, while still fitting into the stock instrument housings for Tri-Five Chevys. Once installed, the new cluster provides a wealth of features that can be read on the display window, and also has lit needles and backlit faces.
Dakota Digital Inc.
Delta Tech Industries has launched its newly developed front grille insert for the '10-11 Camaro known as "Delta Wing." The unit is a plastic sculptured overlay with eight built-in high output LED lights to work in concert with the factory round headlight rings, providing daytime running lights function and style.
Delta Tech Industries
Six-Speed Shift Ball
Drake Muscle Cars adds classic style to the '10-11 Camaro interior with the Camaro script engraved on both sides of a resin knob. Designed from an OE-approved process to mold the shift pattern and stripes flush with the ball, it features an injected polyurethane core to attach like factory.
Drake Automotive Group
Billet Hood Hinges
These billet hood hinges for '61 Impalas are CNC-machined to perfection. They are made of 6061-T6 billet aluminum and utilize sealed bearings for smooth and long lasting operation. Available in various finishes, polished is shown.
Eddie Motorsports, Inc.
E-Street Crate Engines
Edelbrock announced three new E-Street crate engines. The heart of the 315 hp 370 lb-ft of torque performance is derived from the Edelbrock Total Power Package, including E-Street 185cc aluminum cylinder heads and Performer hydraulic camshaft. The E-Street crate engines are available in three levels: a base long-block, a complete carbureted assembly, and a complete EFI assembly.
2010-and-Up Camaro Bushings
For the fifth-generation Camaro, Energy Suspension has focused copious amounts of time and research determining the best possible solution to improving an already epic chassis design. The result is a safer, more track-friendly vehicle. Two options are available for the rear subframe.
Retro-Fit Multi-Port Fuel Injection Kit
Multi-Port Retro-Fit EZ-EFI kits bring the award-winning, self-tuning fuel injection system to existing multi-port fuel-injected applications-including mid-'80s TPI engines. You get everything needed to complete the conversion so you can enjoy the new performance right away.
Fidanza's '10-11 Camaro SS short shifter is constructed of 304 stainless steel and is made in the U.S.A. It includes bushings and installation instructions for smooth performance over the life of the product.
Fidanza Engineering Corp.
Flex-a-lite has introduced a new cross-flow radiator with patented Flex-a-fit side tank design for drop-in installation into '67-69 Camaros. The internal fins perform as heat sinks, which absorb heat quickly from the engine coolant, radiating it through external fins to dissipate heat twice as fast.
2010-'11 Camaro SS Fluidampr
Fluidampr has a new underdrive balancer for the '10-11 V-8 Camaros. It features the factory six-rib pulley with a 25-percent underdrive.
Billet LED indicator lights
Fesler Billet's '69 Camaro indicator lights with custom LED boards and housing are designed to replace the original stock components. The new indicator lights are made from T-6061 billet aluminum and come in seven different finishes. The custom LED's offer more than stock options and are capable of parking (center amber), driving (center white) and indicating functions (amber ring).
Power Rack-and-Pinion Cradle
Flaming River's '64-67 Chevelle Rack-and-Pinion Cradle kit uses a travel bar design to stabilize and properly position the steering pivot points to the original location, and deliver original turning radius. Kit also includes a sway bar for improved handling and performance on curves.
Flaming River Industries Inc.
Hushpower dBX mufflers utilize technology drawn from both the Hushpower2 and Pro series lines to provide maximum performance and deep smooth sound quality. These mufflers feature a 409S stainless steel core and a semi-polished 304S stainless steel outer shell.
Gear Vendors, in collaboration with Lenco, brings overdrive to the renowned four- and five-lever Lenco racing transmissions. This is great news for those 6- and 7-second cars looking to compete in events like True Street or do any street driving.
Gear Vendors Overdrive
Cat-Back Performance Exhaust System
Dual Extreme Sport's exhaust system for the '10-and-newer Camaros give that racetrack sound and maximum performance. Its uses the cats as the only sound suppression and comes in heavy duty aluminized and high quality stainless steel.
Gibson Performance Exhaust
More E-Rod News
There were two big newsworthy things at the GM Performance Parts booth. First is the LS3 E-Rod crate engine now meets California Air Resources Board (CARB) aftermarket requirements, and carries EO number D-126-30. That makes it a perfect fit into your '95-and-earlier OBD-1 model vehicles while retaining emissions-compliance. The other thing was that the supercharged LSA engine is the newest to get the E-Rod packaging treatment.
GM Performance Parts
How about authentic 1967-'69 Camaro bodies from Goodmark? They come with original VIN/ registration, and all sheetmetal except for the cowl panel and pillars have been replaced using Goodmark Parts.
Goodmark Industries Inc.
2010-'11 Camaro Lowering Kit
Ground Force now offers a 1-inch lowering kit for the '10-11 SS Camaros. The kit was designed to improve the handling of the car without compromising the OE ride quality.
These Hedman Block Hugger Hedders are the essential exhaust component when installing a classic 348/409 engine into your muscle car or street rod application. They are offered coated or uncoated and come with all the necessary hardware and gaskets.
Hi-Ram Modular Intake Manifold System
Holley LS3/L92 Hi-Ram Modular Intake Manifold System provides a max-performance, cost-effective alternative to fabricated manifolds on popular LS engine applications. Tops are available for single or dual carbs, EFI, or plain for you to cut your own configuration.
Holley Performance Products
Grant starts with the OEM factory core and then works some magic to give your new airbag-equipped Camaro steering wheel a safe, legal, and much-needed functionality upgrade. Simply reinstall your factory airbag along with any of your original factory switches (if equipped) into the Grant Revolution wheel. This is for automatic cars only, and will not work on stick-shift models.
Hawk Performance Quiet Slot rotors are cast from a proprietary formulation of alloys to increase braking performance. The rotors feature a unique slot design specifically engineered to shorten your vehicles stopping distance.
Pro Touring Rear Sway Bar
Hellwig Motorsports tubular sway bars utilize high-strength, tubular DOM steel to maximize performance but with up to half the weight of a solid bar. All bends are done on computer-controlled benders, and the ends are radiused for better clearance and a clean appearance. This 1-inch bar is made for the GM G-body platform, and has three different hole positions for roll stiffness adjustment.
Hellwig Products Co.
Complete Subframe Assembly
The new Hotchkis bolt-in subframe system combines sport springs, sway bars, and chassis max subframe brace for perfect balance, handling and control. The track-tested bolt-in subframe system arrives on a pallet ready to bolt into your '67-69 Camaro and '68-'74 Nova. Every subframe system is assembled by hand using the highest quality domestic hardware.
Keyless Ignition System
ididit is your key to keyless with the company's newest product, the Keyless Push Button ignition system. It includes two key fobs and one compact control box with 10-foot range ability. The key fob has automatic and manual security ability.
This stock replacement air filter for '08-and-newer Corvettes from K&N features a reversed sealing surface for maximized airflow and surface area. The filter is washable and reusable with a 1,000,000-mile warranty and includes mounting brackets.
K&N Engineering Inc.
Musclecar Drop Spindle Set
Here's a 2-inch drop spindle set for '67-69 Camaros and '68-72 Chevelles. This forged steel spindle is built as a direct factory replacement and has a modular design to accept many brake upgrades.
KW Automotive North America
Drive-by-Wire Electronic Throttle Control (ETC)
Lokar partnered with Williams Controls in developing the first programmable electronic drive-by-wire throttle pedal for the automotive aftermarket. This throttle pedal is three times faster than the OE pedals and also looks much better.
Lokar Performance Products
This billet aluminum LS Protrack serpentine system for LS-based motors is the newest thing to come out of the March Performance camp. It is CNC-machined from 6061-T6 aluminum, features an OEM-style tensioner to ensure perfect belt tension, and a canister-style power steering pump. It comes in either black or chrome, with all the needed accessories.
March Performance Inc.
'60s Muscle Gauge Set
Marshall Instruments brings you retro, muscle-car-era-themed gauges with period look and modern technology. There are three different silk screens available in two different sizes with through the dial lighting and lit pointers. All the traditional gauges are covered like speedo, tach, fuel, volts, and so on.
New from Legendary are these '66 Chevelle door panels with the correct three-dimensional filler board construction, heat-sealed madrid grain vinyl upper, crushed ice grain lower and pebble grain textured chrome accent. This door panel is available in all the original factory colors and grains.
Legendary Auto Interiors Ltd.
With 100-percent aluminized steel construction, these glasspack mufflers from Magnaflow have a non-fiberglass acoustic packing material and a straight-through performance design. They are precision robotic CNC welded in the USA, and come in three different lengths.
MagnaFlow Performance Exhaust
This '66-67 Nova taillight is from Marquez Designs. It is 3D machined from 6061-T6 aluminum and comes as you see here with LED lighting. For a more traditional look, you can purchase a lens that has the clear reverse light area.
LS Oil Pan
If you are putting an LS into your muscle car, you'll want to check into this conversion pan from Mast Motorsports. This pan features a thick cast pan rail that maintains the pan as a stressed member, and its cored and baffled for excellent oil control. It uses production gaskets and can be used with GM oil filters.
Custom Core Support
Mattson's has got the Tri-Fives covered with the company's custom aluminum core support. This made-in-the-USA product fits into the stock V-8 core support and can be ordered for a stock radiator or a cross flow design. The panels don't have any holes in them for a clean custom look. Mattson's also offers radiators and fans for a one stop shopping experience.
Mattson's Custom Radiator
Rear Disc Brake Conversion
MBM now offers a rear disc brake conversion kit for 9-inch rear ends. The kit comes with everything you need to put better binders on your drum brake 9-inch, including the parking brake cables.
Keeping hands safe and clean for years, Mechanix Wear has made improvements to some of its original gloves. The updated M-Pact features a molded finger and knuckle design, and a padded index finger for increased dexterity.
Electric Water Pump
Performance gains and good looks can be had for the '10-and-newer Camaro with Meziere's electric water pump. The company claims you get low speed cooling improvements and 11-14 top end horsepower. The pump is backed by a two-year warranty.
Meziere Enterprises Inc.
Remote Water Pump Adapter Kit
New from Moroso is this remote water pump adapter kit for GM LS series engines. It will free up space and allows the use of cost-effective remote electric water pumps. Includes billet aluminum adapter blocks, fasteners, o-rings and -12AN fittings.
Moroso Performance Products
Chevy To T56 Bellhousing
Mr. Gasket now has a bellhousing in the Quicktime line that allows you to mount up a T56 transmission to a big- or small-block engine. What makes it unique is this bell allows you to use a mechanical clutch linkage and throw out bearing.
Mr. Gasket/Prestolite Performance
DA Microfiber Correction System
Meguiar's DA Microfiber Correction System is a unique, purpose-engineered system of new technology, microfiber pads, and liquids for optimal results. The heart of the system is the dual-action polisher that features a low-risk, dual-action rotation and orbit pattern with an 1800-to-6800-opm (oscillations per minute) adjustable speed range.
Mickey Thompson has just added new 19- and 20-inch sizes to the ET Street Radial II line, perfect for new American Muscle car applications like the fifth-gen F-body. New sizes include P305/35R19 and P305/35R20.
Mickey Thompson Performance Tires and Wheels
Now you can easily remove the racing evidence from the rear quarters. Mothers' R3 Racing Rubber Remover is a pro-strength cleaner that safely removes rubber scuffmarks and road grime from paint, glass, and vinyl wrap surfaces.
Digital 6A and 6AL
MSD has done the unthinkable and updated the 6A/6AL ignition boxes to digital units. The new version is more efficient and more powerful thanks to the modern circuitry. A sleek housing provides a modern look and now features a plug-in harness.
Direct Port Nitrous Systems
Nitrous Express introduces MainLine nitrous systems at a price even the most budget-restricted racer can afford. Includes jetting for 100-, 200-, 300- and 400hp. It includes stainless steel bottle brackets, NX Piranha nozzles, aircraft quality steel braided hoses, 12-ft stainless steel braided D-6 feedline, and nickel-plated fittings.
D.O.T. Compliant Competition Drag Radial
Nitto Tire brought its D.O.T.-compliant competition drag radial, the NT05R. The dual-purpose sidewall construction is enhanced for traction during launch as well as straight-line stability at the top-end. This improves consistency and controllability throughout the entire pass. The NT05 has been out for a while, but now Nitto offers it in a massively wide 345/30R19.
A/C Hose Kit
New from Old Air Products is this A/C hose set built specifically for the '69 Camaro. It includes suction and discharge hose assemblies, liquid line, and O-ring seals.
Old Air Products
Let your Corvette rumble with the header and sidepipe set up from Pertronix. The 16-gauge headers are available for big- and small-blocks that hook up to the awesome sidepipes. There are three finishes available including chrome, black, and ceramic.
Pertronix Performance Products
Looking for a stronger motor mount for your fifth-gen Camaro? Then check out these from Prothane. The billet and urethane mounts are designed to limit travel, reduce the chance of breakage, and put the power to the wheels.
Retro USA helps you add some old-school styling to your new Camaro with the company's retro-styling kit. You get hood vents, quarter moldings, rocker moldings and front and rear bumpers.
Retro USA Inc.
For all you owners of the last El Camino Chevy made, Original Parts Group (OPG) has your back. Years in the making, it now carries the '78-87 bedrail trim kit. Now you can freshen up the back of your Elco without tons of searching and work.
Original Parts Group
ProCharger's new intercooled Stage II centrifugal supercharger system for '11 LS-powered Camaros, produces 185-plus additional horsepower at only 7 psi boost. The kit comes with all components needed for quick and complete installation.
Pre-Assembled Bucket Seat
For all of you not up to the task of installing foam and seat covers, you will love these pre-assembled '69-'72 GM A-body bucket seats. They include new tracks, new frames, new PUI foam, new PUI upholstery, all-new hardware, and emblems. These have got to be the first original replacement plug-and-play seats.
Parts Unlimited Inc.
Fuel Injection Harness
Painless takes the pain out of dropping in a '07-'10 GM 4.8, 5.3, or 6.2L engine with 4L60-85E transmission into your classic. The harness makes it simple and supports Active Fuel Management and VVT engines.
Painless Performance Products
Turnkey EFI Kit
This kit includes everything you need to convert from a carb to a modern EFI system. Its ECU can be operated in a self-mapping mode to cut down on set-up time, or manual-mapping for those people who want a specific tune.
Wireless Remote Shock Adjust System
QA1 now provides users the ability to tune their QA1 adjustable shock absorbers via a wireless remote control from inside the vehicle. Now you can tweak your shock valving on the fly for improved handling in current conditions. No hardwiring to the cockpit is needed. Old QA1 shocks can be retrofitted with the system for a fee.
Impact Forged Coilover Shock
Ridetech's Impact Forged Gas Monotube Coilover is claimed to be the company's finest shock package ever. Fine thread pinch clamp adjuster, internal bump stop, dual shaft/dust seals, and rebound adjustable are just a few of its many features. The CNC cold-wound high tensile steel springs provide more travel and better ride quality.
SLP's 20-inch wheels feature gloss-black painted spokes with a machined spoke face. These lightweight 20x8 front and 20x9 rear wheels provide the same offset and width as the factory wheels, and can be remounted and balanced with the 245/45/ZR20 and 275/40/ZR20 tires equipped from the factory.
SLP Performance Parts
Spectre ProFab Fabricated aluminum door panels are available for '67-81 Camaro, '64-72 Chevelle and '70-72 El Caminos. They are made in America and will give your ride that racecar look without all the expensive bead rolling tools.
Rocket Racing Wheels Rocket Launcher rim preserves the original nostalgia gasser design. Its available in polished, painted, and as cast in 15-inch diameters.
Rocket Racing Wheels
Soffseal is proud to introduce '93-'02 Camaro and Firebird weatherstripping for coupe, convertible and T-top cars. Now you can stay nice and dry when it rains, and not be annoyed by whistling air leaking into the car.
Front Brake Kit
The Supertwin front brake kit from Stainless Steel Brake Corp (SSBC) is offered for most muscle cars. It consists of two-piston aluminum calipers with stainless steel pistons, 13-inch cross drilled, slotted, plated rotors, and all necessary installation hardware. It bolts to drum or disc spindles.
Stainless Steel Brakes Corp.
The Schwartz Performance chassis is designed for optimum handling while maintaining excellent ride quality. It uses racing-style components for maximum strength and performance. The stock GM A-Body chassis have over 200 percent more torsional flex than this chassis, and it installs without floor pan cutting.
Schwartz Performance Inc.
Lose some weight and gain 40- to 50-percent more cranking power with this high-torque LS starter from Proform Parts. Designed to fit the LS1, LS2, LS6, and LS7 engines, this 100-percent new starter is approved by all leading sanctioning organizations for competition.
Specialty Auto Parts
The Works by Surf City Garage makes it easy to grab just the right stuff for keeping your ride nice and clean. The Works comes with Pacific Blue Wash and Wax, Dash Away Interior Spray, Clearly Better Glass Cleaner, and Speed Demon Wax Detailer all in one box.
Surf City Garage
Manually shift through six gears or enjoy automatic cruising while the 6x Six-Speed Transmission from TCI delivers improved performance, enhanced fuel efficiency, and a superior driving experience. Now the 6X is offered with an SFI approved bellhousing.
Comp Performance Group
Type II Power Steering Pump
Tuff Stuff has added the Type II power steering pump to its full line of chrome parts. Now you can add some more shine to your front drive accessories.
Tuff Stuff Performance Accessories Ltd.
Rear Disc with Parking Brake Kit
DynaPro 11-inch internal drum E-brake rear kits are perfect for enthusiasts who have vehicles that are running smaller diameter rear wheel sizes. The brake kit features Wilwood's special internal drum parking brake design that allows an efficient parking brake system that is easy to install, and a snap to hook into the stock parking brake cable system.
These '69 Platinum Camaro door panels from TMI Products feature OE match materials and construction, All OE colors are available, as well as custom colors. The panels come fully assembled and ready to install.
TMI Products Inc.
Unisteer was proud to unveil the bolt-in rack-and-pinion setup for '58-'82 Corvettes utilizing factory or aftermarket columns. Small- and big-block applications are available.
Unisteer Performance Products
Perimeter Plate Nitrous System
ZEX LSX Perimeter Plate Nitrous System with Cryo-Sync technology offers a consistent distribution of nitrous and a simple bolt-on upgrade that is tunable from 75-300 hp.
COMP Performance Group
L92 and LS3 Heads
The new Trick Flow GenX 255 heads for GM L92/LS3 enignes feature a straighter port design compared to OE for improved flow and velocity, 100-percent CNC-ports, 12-degree valve angles, 2.100 int/1.600 exhaust SS valves, and flow 357cfm@.600 lift. They come assembled and can support up to 650-700hp naturally aspirated. These heads will also bolt to the iron 6.0L block.
Trick Flow Specialties
The new Lysholm 2300 supercharger system from Vortech develops up to 620 horsepower for the '10-11 Camaro SS. The Lysholm twin-screw design has a cast aluminum air inlet manifold, six-rib pulley, and features an integrated bypass valve and actuator.
Double adjustable struts
New from Strange Engineering are these double adjustable struts for the 1982-'92 F-Bodies. The wide range of valving can be used to control weight transfer at launch and ride quality down track. The ability to have the struts re-valved by Strange Engineering can also accommodate applications that need stiffer or softer valving than what comes stock.