Light 'Em Up - LED Taillights for First-Gen Camaros
|
This is how the completed circuit board installation into the taillight housing should look before the lens is installed. The grommet on the left was not plugged into the housing to show how the wire will sit inside the grommet before plugging into the taillight housing. The housing shown in this picture is a standard body taillight housing that has the additional center hole for a backup light. If you are installing the kit in a standard body housing, you can use one of the supplied backup light sockets to retain your backup lights. This will be explained during the harness hookup instructions. View Related Article
|
|