Light 'Em Up - LED Taillights for First-Gen Camaros
|
The taillight bucket assemblies are reproduced today. These production housings have slight differences in the location of the mounting legs. The kit is supplied with a second set of templates that define the circuit board mounting holes based on these differences. Be sure to select the correct set of templates based upon whether you are using original or reproduction housings. It is important to select the correct template before drilling the circuit board mounting pilot holes as defined in the next step. Because of this difference in housings, we recommend that you drill small pilot holes and test the fit of the circuit boards before drilling the final 0.32 (5/16)-inch mounting hole. View Related Article
|
|