NPD also offers OEM-style full factory quarters like this one that is fitted to the factory seam at the roof and carefully located against to the door jamb, wheelhouse, and trunk. The quarter is then clamped to the car.NPD also offers OEM-style full factory quarters like this one that is fitted to the factor Kevin Rock works to install hinges to the new reproduction door shell. Both hinges and door shell are a couple clicks away via NPD's online ordering website.Kevin Rock works to install hinges to the new reproduction door shell. Both hinges and doo Nick and Kevin install the new door to the body while leaving the hinges snug to allow for adjustment.Nick and Kevin install the new door to the body while leaving the hinges snug to allow for Note the holes punched for welding along the edge of the quarter, and the new striker installed. Since the quarter-panel is clamped in place, the door is adjusted for best alignment and then tightened. Further adjustment might be necessary when the fenders are installed.Note the holes punched for welding along the edge of the quarter, and the new striker inst The driver's side is next, as Nick and Kevin work together to fit the new OEM-style quarter-panel to the body.The driver's side is next, as Nick and Kevin work together to fit the new OEM-style quarte Hanging the door is definitely a two man job. Then we were off to the front of the Chevelle. The old frame mount brace is removed from the radiator support.Then we were off to the front of the Chevelle. The old frame mount brace is removed from t The radiator support brace receives a cleanup at the mounting points, but will later be blasted to bare metal.The radiator support brace receives a cleanup at the mounting points, but will later be bl The new radiator support is mocked up against the frame ends prior to installation. The original brace and new reproduction radiator support are installed and snugged in anticipation of fender installation.The original brace and new reproduction radiator support are installed and snugged in anti The days of hunting for NOS fenders at outrageous prices are over. Brand new fenders from NPD are exact in fitment, and feature clean and crisp character lines.The days of hunting for NOS fenders at outrageous prices are over. Brand new fenders from Great pains are taken to fit the quarters, doors, and fenders. When satisfied, Kevin tightens both door and fender bolts down. The custom L88 hood is being "figured out" in the mind of Route 66 Motorsports owner Bill Jelinek for a future install.Great pains are taken to fit the quarters, doors, and fenders. When satisfied, Kevin tight « | 1 | 2 | View Full Article By Arvid Svendsen Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
