An interesting feature of the frame-patterned after the original-is the parallel rails aft of the engine.An interesting feature of the frame-patterned after the original-is the parallel rails aft Again, like the original design, the exhaust is funneled through holes in the frame. The rear of the frame is a straight-forward design, with high axle hoops that allows the Biscayne to set low to the ground, as a concept car should.The rear of the frame is a straight-forward design, with high axle hoops that allows the B Joe Bortz (left) and builder Kerry Hopperstead pose with the chassis and body prior to the body being fitted to the frame. Hopperstead is a longtime street rod builder, with more than 30 years of fabrication experience.Joe Bortz (left) and builder Kerry Hopperstead pose with the chassis and body prior to the The rear of the frame is a straightforward design, with high axle hoops that allows the Biscayne to set low to the ground - as a concept car should.The rear of the frame is a straightforward design, with high axle hoops that allows the Bi « | 1 | 2 | 3 | View Full Article By Barry Kluczyk Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
