Now the combination 3/8-inch and 3/20 x 3-inch bolts are bolted into place.
With sub frame connectors properly bolted up, they should butt up to the Chassisworks front sub frame like this.
Now it's time to install the 'Gem's Currie 9-plus live rear axle.
Our installers begin with the installation of the Classic Industries '67 Camaro polyurethane spring eye bushings and shackle brackets using the provided reproduction Camaro shackle bracket bolts.
On the opposite end our crew installs the OE reproduction spring bucket for the Camaro rear leaf springs to "sit" in using the OE bolts provided.
After the leaf springs are installed, the next step is getting the Currie "9+" rear axle housing in place. This is where having lots of friends is a good thing.
And here's how it looks. In Part Four, we're going to install the fuel tank, exhaust system, and steering column. It's beginning to look like a car now.