Also supplied with the Mid America Motorworks front suspension kit are inner and outer tie-rod ends. Tom removed the inner and outer together as a unit in order to measure the length. After calculating the proper length Tom removed the sleeve nuts and turned each end out (one right handed, one left). While this should put your steering close to its original alignment, it's always suggested that an alignment be performed when replacing parts of this magnitude.Also supplied with the Mid America Motorworks front suspension kit are inner and outer tie Pictured is the steel Rally Wheel (15x8) obtained through Mid America Motorworks, along with special Argent Silver wheel paint. These wheels come ready to spray; just a little scuffing with a Scotch-Brite pad, a quick cleaning, and some nice even coats of paint. We called on Firestone for some new shoes. Editor Campisano chose the Firehawk 255/60/R15 Indy 500-series rubber for its aggressive performance, yet excellent all-season street demeanor.Pictured is the steel Rally Wheel (15x8) obtained through Mid America Motorworks, along wi We would like to give the crew at BBC special thanks for the proper care received while rebuilding the front-end of Project Homewrecker. We would also like to thank Bruno Deolivira of All Tow for fulfilling all of our transportation needs. I can taste a testdrive coming soon.We would like to give the crew at BBC special thanks for the proper care received while re SOURCES All Tow MID AMERICA MOTORWORKS #1 Mid America Place P.O. Box 1368 Effingham IL 62401 BBC Specialty Automotive Center Motor City Auto Body Dept. MMFF 11 Ferdon St. Newark NJ 07105 Firestone « | 1 | 2 | 3 | View Full Article By Dan Ryder Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
