|
Flaming River Tilt Steering Column - Ergonomic Edge
Companies like Flaming River are making retrofit tilt steering columns for our cars, and the best part is that they are brand new and made... more |
|
|
|
1969 Nova Steering Box - Course Corrections
Our old horse, a Chevy Nova, has been lacking in handling and we thought it would be a great time to upgrade the steering box with a new... more |
|
|
|
1972 Chevy Nova Suspension - The No-Bull Nova, Part 1
Last November we started to conceptualize our Nova and decided to build a pro-touring car above all, and with Detroit Speed's mini tubs in... more |
|
|
|
1957 Chevy Bel Air Suspension - Anti-Orca Devices
Ron Godel's '57 Bel Air 210 powers through the slalom course but having been dissatisfied with the handling in the past, the decision was... more |
|
|
|
1971 Camaro Suspension - Attitude Adjustment
We spotted an affordable and easy to install Pro Coil kit form QA1, and decided to take our buddy's '71 Camaro to see how good they are. more |
|
|
|
1966 Chevy Chevelle SS Suspension - A Detroit Overhaul
Joe Juliano's '66 Chevelle SS is structually sound but is need of a suspension upgrade after its 40-plus years of service, luckily Detroit... more |
|
|
|
1971 Chevy Camaro Rear Suspension - Back To The Street, Part 4 - Tech
After completing the front suspension we felt the need to match the rear suspension of our '71 Camaro with Fat Man Fabrications bolt-in... more |
|
|
|
1969 Chevy Camaro Watt's Link and Torque Arm Kit Install - Getting A Better Handle On Things The Watt's Way
We Install A BMR Watt's Link And Torque Arm Kit On A First-Gen Camaro For Better Handling And Superior Control more |
|
|
|
Heidts' Pro-G Front And Rear Suspension - Bottoms Up
With A Little Know-How And A Free Weekend, Heidts' Pro-G Front And Rear Suspension For The Second-Gen Camaro Installs With Ease. more |
|
|
|
1987 Monte Carlo SS Suspension - Armed, But Not Yet Dangerous
We change the front suspension for our '87 Monte Carlo SS to achieve straight line traction. more |
|
|
|
1969 Camaro Project Heroes Two - Horsepower Surge Handled
To handle the power of the LS7, the crew at Route 66 Motorsports installs a Detroit Speed Engineering Quarda Link rear suspension, and a... more |
|
|
|
1969 Camaro Subframe - Like It's On Rails
A '69 Camaro SS gets a hydroformed front subframe and suspension package as it gets ready for Project American Heroes 2. more |
|
|
|
1969 Nova Suspension Kit - Flat Lining
An old '69 Nova suspension gets a suspension upgrade from Classic Performance Products. more |
|
|
|
Camaro Suspension Upgrades - Third-Gen Throw Down
Our 1983 Chevy Camaro gets its suspension worked over, then hits the track more |
|
|
|
1966 Chevy Nova Rear Chassis - Rear-Surrection, Part 1
A '66 Nova dream car gets its rear hacked out to mak room for an easy tune rear suspension system. more |
|
|
|
Coil Spring Installation Basics
Associate Editor Mike Harrington goes over the basics of installing new coil springs, and how to get the right spring compressor for the... more |
|
|
|
Chevy Nova Suspension - Let's Right this Nova Ship
Get your 1968-1974 Chevy Nova to handle like a track star with some dynamite suspension upgrades more |
|
|
|
1970 Chevy Nova And Rear End Suspension Kit - A Slip Of The Clip
Check out Total Cost Involved and Jim Reese's production of a four-link rear end specifically for the third generation 1970 Chevy Nova! more |
|
|
|
1970 Chevy Nova Suspension Overhaul - A Slip Of The Clip
TCI (Total Cost Involved)is at it again, but this time they have a 1970 Chevy Nova that will get a complete suspension overhaul. more |
|
|
|
1955 Chevy Suspension - Putting Up A Good Front
We modernize our front suspension on the '55 Chevy hardtop with a front suspension kit from Mcgaughy's Suspension Parts that includes... more |
|
|
|