Motor City Mold (MCM)
Brief Description: Motor City Mold hoods, more commonly referred to in the Corvette community as MCM hoods, still leads in design and ease of installation. C5 and C6 Corvettes fitted with MCM hoods regularly place First in shows throughout the U.S. and are popular on the racetrack due to their light weight and contribution to increased speed. The signature, rear facing, functional vent exhausts excess heat as well as turbulent air that would normally travel under the car.
Trademark Features: MCM vacuum-bagged composite hoods use high-grade carbon-fiber, resulting in a dimensionally and structurally sound part that saves between 6.5 and 10 pounds, depending on model. All versions of the MCM hoods are available with the center clearcoated, showing the carbon-fiber interior, a popular enhancement since the arrival of the ZR1, with its use of exposed carbon-fiber.
Quote From Company: "MCM: the most talked-about hoods on the Corvette Forum."
SLP Performance Parts
Brief Description: SLP offers a C6 composite hood with functional hoodscoop to fit '05-'10 Corvettes. This OEM-quality hood is manufactured using the same process that SLP used when manufacturing more than 52,000 Camaro SS, Firebird Firehawk, and Trans Am and Formula WS6 specialty-vehicle hoods for GM and its dealers. This aggressive, functional hoodscoop will set your Corvette apart from the rest.
The hood is shipped to you or your body shop ready to prep, prime, and paint. All necessary hardware, detailed instructions, and a serial-numbered authenticity plate are included. (SLP will soon be releasing three ZR1-style hoods. Look for these products on our website.)
Trademark Features: OEM-quality composite material utilizing RTM (resin-transfer molding) process; OEM-style molded-in crush initiators; same weight as stock OEM hood; fully functional scoop forces cold air into the engine compartment, extracting unwanted heat; internal water-control system prevents rain and snow from getting onto critical engine components; a serial-numbered authenticity plate; coated inner-hood hardware with bumpstop receptacles; accepts factory inner-hood liner; easy, bolt-on installation requiring no modifications and maintaining all factory gaps; all hardware and installation instructions are included; one-year warranty covering materials and workmanship.
Quote From Company: "SLP manufacturers OEM-quality hoods that have subtle yet aggressive styling, safety, and performance benefits typically not found in aftermarket fiberglass hoods. They look as good as the fitment!"