2010 Chevy Camaro SS Suspension Upgrade - Prescription 4 Performance

We Tame Our '10 SS Camaro's Roll With A Suspension Kit From Detroit Speed.

View Full Gallery

When General Motors decided to build the new '10 Camaro, they wanted the car to perform, but that term means different things to different people. The vast majority of people have never driven a truly fast car. They get out of their Honda Civic to test drive a '10 SS and feel like they've been strapped into a rocket ship. They take a curvy road and feel like they're on rails. However, a small minority of people out there know better. They've driven fast cars that can carve corners with the best of them, and it takes a bit more to peg their "fun meters." Chances are that if you're reading this magazine, you fall into the latter group of miscreants.

Camp_1001_01 2010_chevy_camaro_ss_suspension_upgrade Track_test 2/31

The main problem with the new Camaro is that it's big, not in a dimensional sense, but certainly in terms of weight. Mass in motion wants to stay in motion, and the more weight you have shooting along in a given direction, the more difficult it is to get that petrol-fueled mass on another trajectory. Add in the fact that GM's main concern is making the majority of buyers happy, and it's easy to see how our little minority of performance junkies is left wanting more.

Detroit Speed Inc. saw the limitations of the '10 Camaro SS right away and decided to engineer a kit that would help the heavy Camaro transition from one direction to another with greater ease. They also wanted to make the system easy to install and affordable.

Camp_1001_03 2010_chevy_camaro_ss_suspension_upgrade Suspension_kit 3/31

The result is a kit that doesn't attempt to reinvent the wheel, but rather make that wheel better than it was. Bigger sway bars to help tame body roll work in concert with higher rate coil springs. The effect is a Camaro that ends up feeling a lot lighter than it really is. As a side benefit, it also drops the stance down to the level that is aesthetically pleasing, yet not so low that you end up cringing in terror at every speed bump or slightly inclined driveway.

And while we appreciate a killer stance as much as the next guy, we really felt we needed "before" and "after" testing. After all, this is Camaro Performers, not Camaro Posers. With that in mind, we baseline tested our project SS on both the skidpad and the slalom. We then installed the DSE parts and retested the SS on the same tires and wheels that it had from the factory. No trickery or other shenanigans to sully the results.

Follow along as we upgrade the Camaro Performers '10 SS.

Camp_1001_05 2010_chevy_camaro_ss_suspension_upgrade Brake_line_bracket 4/31

Back To The Track
Prior to doing the suspension upgrades, we took our bone-stock SS to our test venue to get some baseline numbers. The two tests applicable to these suspension upgrades were the slalom and the skidpad. The slalom we use is 420 feet long consisting of cones spaced 70 feet apart. Our skidpad test measures a car's lateral grip buy hauling ass around a 200-foot diameter circle. The best time clockwise is averaged with the best time counter clockwise and that number is plugged into a formula that gives us an average g-force reading. This method makes it extra tough to hit the magic 1g number, but then again, it's not supposed to be easy.

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

TO TOP