1971 Chevrolet Camaro - Project Orange Krate Custom Interior

Office Space - Project Orange Krate Gets New Interior Threads

Chuck Vranas Apr 9, 2014 0 Comment(s)
View Full Gallery

Every aspect when building a car from the ground up is about the details. The sum of the parts you select as well as the level of the execution during final assembly will determine the overall quality once completed. No detail is too small, and when you're focusing on your business office, there are loads of minute areas that require lots of attention. In the case of Project Orange Krate, our '71 Camaro, the car received a custom-molded interior at some point in its life, which may have been bitchin in the day, but there was no way it would cut it in its drastically changed form: a purpose-built, hard-core track and street car. A change from its original boulevard cruiser demeanor to one that is infinitely more aggressive.

Since the majority of its original interior had either been modified or tossed by the last interior shop in favor of custom touches, it left us with pretty much an empty shell needing to be refreshed from every corner. For Peter Newell of Competition Specialties in Walpole, Massachusetts, it was time to create an interior that would give Orange Krate a fresh look while maintaining its original factory-born roots. It's no small feat to take on ordering a complete interior including every screw, washer, and mounting clip, but thanks to the team at Ground Up, Pete was able to source the majority of what he needed with a single phone call.

A few interior items remain to complete the installation, including reproduction dash vents and a killer stereo. Once received, Orange Krate's business office will be complete and ready for action.

Stay tuned as we head into final exterior assembly in our next installment!

1971 Chevrolet Camaro 2/33

01 Getting started at the top (literally), Competition Specialties team member Pat Dickinson laid out the fresh headliner from Ground Up to flatten it out. He then placed the five headliner bows into their respective sleeves.

1971 Chevrolet Camaro Install Headliner Retaining 3/33

02 New headliner retaining strips were then installed front and rear with a Phillips head screwdriver as well as a fresh set of headliner bow clips to the interior roof panel.

1971 Chevrolet Camaro Headliner Test 4/33

03 Dickinson then test-fit the headliner. With the fit good, the headliner was removed and the balance of the Dynamat was added to the inner roof panel. The bows were then snapped into place followed by fastening the headliner to the headliner retaining strips.

1971 Chevrolet Camaro Secure 5/33

04 The headliner was then stretched side-to-side to eliminate any wrinkles. From there it was secured in place and followed up by installing all the related trim pieces.

1971 Chevrolet Camaro Ground Up Carpet 6/33

05 To freshen up the floor, Ground Up supplied us with a factory molded, two-piece black loop carpet kit made out of an 80/20 rayon and nylon blend. Because of the Detroit Speed rollcage, some cutting was required with a razor knife to perfect the fitment.

1971 Chevrolet Camaro Shifter Carpet 7/33

06 Some additional cutting was also required to accommodate the shifter. A razor knife was used to make final fitment a snap.

Totally Stainless Body Kit 8/33

07 When reassembling your project, there's nothing better than opening one box that has all the stainless hardware you need. A complete body kit from Totally Stainless ensures no parts-store runs or last-minute phone calls to track down missing pieces.

1971 Chevrolet Camaro Secure Sill 9/33

08 With the carpet in place, Dickinson used hardware from Totally Stainless to secure the new sill plates.

1971 Chevrolet Camaro Install Kick Panel 10/33

09 Competition Specialties owner, Peter Newell, then installed a pair of exact reproduction black kick panel assemblies from Ground Up.

1971 Chevrolet Camaro Lower Rear Interior Side 11/33

10 The lower rear interior side panel was then set in place and screwed into position.

1971 Chevrolet Camaro Panel 12/33

11 Here you can see just how perfect the fit of the new lower rear side panel and upper sailpanel are and just how nice they finish this area of the interior.

1971 Chevrolet Camaro Vinyl 13/33

12 An exact die-stamped black-vinyl covered rear package deck tray is a perfect complement to the refreshed interior. Here, Newell test-fits it for trimming around the rollcage.

1971 Chevrolet Camaro Trunk Divider 14/33

13 The trunk divider board was then fitted to mount between the rear seat and the trunk area.

1971 Chevrolet Camaro Inner Door 15/33

14 In preparation for the new, black door panel installation, the inner door panel water shield was taped into place.

1971 Chevrolet Camaro Door Lock 16/33

15-16 A new door lock ferrule was placed into the new door panel top rail and then secured using a standard screwdriver to bend down the tabs, securing it in place.

1971 Chevrolet Camaro Secure Door Lock 17/33

16

1971 Chevrolet Camaro Door 18/33

17 To keep the outside elements outside, fresh door weatherstrips manufactured in OEM-style soft latex rubber were set in place using new, kit-supplied mounting clips.

1971 Chevrolet Camaro Door Panel Top 19/33

18 Using more of the hardware from Totally Stainless, the door panel top rails were screwed into place.

1971 Chevrolet Camaro Armrest 20/33

19 The new reproduction lower door side rail requires an armrest pad be installed from inside the panel using a pair of Phillips head screws.

1971 Chevrolet Camaro Assemble Lower 21/33

20 Here, Newell assembled the unit.

1971 Chevrolet Camaro Lower Door 22/33

21 Here you can see where the lower door side rail will secure to the new door panel.

1971 Chevrolet Camaro Secure Lower Door Side 23/33

22 Using a number of short Phillips head screws, the lower door side rail and armrest are secured to the door panel. Make sure the door panel is on a secure surface when performing this step.

1971 Chevrolet Camaro Door Panel 24/33

23 To prepare the door panel to be mounted, a set of fresh door panel clips were secured to the rear of the door panel.

1971 Chevrolet Camaro Install Door 25/33

24 Newell then set the door panel into place on the door, working from left to right.

1971 Chevrolet Camaro Install Window 26/33

25 Next, the new window crank handle and shim gasket were fitted and secured in place with the supplied retainer clip.

1971 Chevrolet Camaro Secure Lower Door 27/33

26 The door panel was then finally secured in place with a pair of long Phillips head screws mounting it to a support bracket on the inner door.

1971 Chevrolet Camaro Trim Door Panel 28/33

27 To complete the door panel, a razor was used to cut an opening for the inner door handle latch mechanism.

1971 Chevrolet Camaro Install Inner Door 29/33

28 The inner door handle latch mechanism was attached to the latch rod, secured in place, and topped off with a fresh black escutcheon.

1971 Chevrolet Camaro Door Jamb 30/33

29 Machine-finished custom doorjamb vents with complementing stainless door striker bolts, both from Eddie Motorsports, add plenty of killer looks to the doorjamb.

1971 Chevrolet Camaro Rear Seat 31/33

30 For the ultimate in comfort, fresh rear seat foam for the seating and backrest were mounted to the seat frames then covered with new, standard black vinyl seat covers.

Dash Panel Parts 32/33

31 To give the dash a full custom look a new, black molded ABS dashpanel from Rick's Camaro was the perfect addition to make the Racepak IQ3 display dash placement look like a factory option.

1971 Chevrolet Camaro Interior 33/33

32 Project Orange Krate's business office looks bitchin and is almost complete as it awaits a few final items. Stay tuned as we move into final assembly of the body and a few final tricks from Peter Newell and the crew at Competition Specialties.

Sources

Competition Specialties
508-510-7043
www.competition-specialties.com
Racepak Data Systems
Rancho Santa Margarita, CA 92688
949-709-5555
www.racepak.com
Totally Stainless
717-677-8811
www.totallystainless.com
Procar by Scat
Redondo Beach, CA 90278
310-370-5501
http://www.procarbyscat.com/
Eddie Motorsports
Rancho Cucamonga, CA 91730
888-813-1293
www.eddiemotorsports.com
Dynamat
Hamilton, OH 45015
513-860-5094
http://www.dynamat.com
Ground Up Restorations
Naugatuck, CT 06770
866-358-2277
www.ss396.com
Rick's Camaros
Athens, GA 30601
800-359-7717
www.rickscamaros.com
Detroit Speed
Mooresville, NC 28115
704-662-3272
www.detroitspeed.com
« Prev 1 2 Next »

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

subscribe to the magazine

get digital get print
TO TOP