Project Cars

Go
project cars
How This 1955 Chevy Could End Up In Your Garage
Evan Perkins Jul 28, 2015
How This 1955 Chevy Could End Up In Your Garage
With the Danchuck Tri-Five Nationals just around the corner, Woody’s Hot Rodz is putting the finishing touches on this 1955 Chevy, which will be given away ... » Read More
engines drivetrain
1968 Camaro 461-Inch RHS LS Engine Build and Dyno
Steven Rupp Jul 9, 2015
1968 Camaro 461-Inch RHS LS Engine Build and Dyno
We decided to pull the 461 apart, do a rebuild, and see how everything was holding up for our Project car, Bad Penny. » Read More
project cars
March 1957 Chevy Convertible Gets a Custom Firewall & Floor
Scott Parker Jul 2, 2015
March 1957 Chevy Convertible Gets a Custom Firewall & Floor
If the previous installments didn’t tip you off, this is no throw-together-in-a-weekend type of build. This is an all-out Pro Touring build that will be the ... » Read More
project cars
How to Build an 8-inch Ford Rearend for a 1959 Chevrolet Corvette
Steven Rupp Jun 16, 2015
How to Build an 8-inch Ford Rearend for a 1959 Chevrolet Corvette
Engines get all the glory, but without a properly built differential, a Corvette is just relegated to noisy yard-art status. Learn how to build the perfect ... » Read More
project cars
Wiring in Accessories Into Our 1972 Corvette Project Car
Jeremy D. Clough Jun 11, 2015
Wiring in Accessories Into Our 1972 Corvette Project Car
In this installment of Project Scarlett, our 1972 Corvette project car, we’re adding non-factory accessories, some of which are easier than others. » Read More
A Different Way to Route Engine Wiring Through the Firewall on a 1972 Corvette
Check out how we find a different way to wire up our 1972 Corvette Project Scarlet's LS3 416 to the FAST XFI computer and ignition box. » Read More
Jeremy Clough Jun 5, 2015
project cars
A Different Way to Route Engine Wiring Through the Firewall on a 1972 Corvette
Here’s One Way to Mount Remote Shock Reservoirs on a Pro Touring Second-Gen Camaro
With Project Orange Krate, our 1971 Camaro, almost ready to tear up the streets, there was one more bit of performance to add to the mix. » Read More
Chuck Vranas May 7, 2015
project cars
Here’s One Way to Mount Remote Shock Reservoirs on a Pro Touring Second-Gen Camaro
1972 Corvette Scarlett Project Car - Taming the Rat's Nest
We’ve spent the last couple of months wiring Scarlett, our project 1972 Vette coupe, as we’ve worked to integrate the new factory ... » Read More
Jeremy D. Clough Apr 29, 2015
project cars
1972 Corvette Scarlett Project Car - Taming the Rat's Nest
1972 Corvette Scarlett Project Car - C3 Column Rebuild
Word to the wise: this is not for the faint of heart. Of all the things we’ve done to our beloved Shark, this was one of the most ... » Read More
Jeremy D. Clough Apr 24, 2015
project cars
1972 Corvette Scarlett Project Car - C3 Column Rebuild
1970 Chevy Chevelle - Basket Case Chevelle: Part 4
As we've said from the beginning of this project, missing parts are normal with a basket case car. » Read More
Mark Ehlen Apr 20, 2015
project cars
1970 Chevy Chevelle - Basket Case Chevelle: Part 4
1968 Camaro Project Track Rat - Six-Point Chassisworks Exact-Fit Rollcage Installation
There’s no better way to increase safety and chassis stiffness than by adding a well-designed rollcage. Check out our install of the ... » Read More
Steven Rupp Apr 15, 2015
project cars
1968 Camaro Project Track Rat - Six-Point Chassisworks Exact-Fit Rollcage Installation
How We Got Our 1967 AMD Chevrolet Chevelle SS Ready for the Hot Rod Power Tour
It was one of those emails from your boss that you fear: “The AMD Chevelle is going on the Hot Rod Power Tour. Make sure it’s ready and ... » Read More
John Gilbert Mar 24, 2015
project cars
How We Got Our 1967 AMD Chevrolet Chevelle SS Ready for the Hot Rod Power Tour
1958 Chevrolet Corvette Project Car - Steering Upgrade, Part 2
As we covered in the last installment, the first-generation Corvette’s front suspension and steering—unfortunately—was closely tied ... » Read More
Scott Parker Mar 11, 2015
project cars
1958 Chevrolet Corvette Project Car - Steering Upgrade, Part 2
1972 Corvette Scarlett Project Car - Dash Wiring Harness Installation
Since we’ve gone non-factory with the radio, tach, and many of the smaller gauges, there’s a lot more to do than just plug connectors ... » Read More
Jeremy D. Clough Mar 9, 2015
project cars
1972 Corvette Scarlett Project Car - Dash Wiring Harness Installation
1971 Chevrolet Camaro Project Orange Krate - Split Bumper and Finishing Paint
When coming around the corner on a full build there’s always plenty to do near the end. You could call this installment “bits ’n’ ... » Read More
Chuck Vranas Feb 12, 2015
project cars
1971 Chevrolet Camaro Project Orange Krate - Split Bumper and Finishing Paint

subscribe to the magazine

get digital get print
TO TOP