January 2013 Parts Bin

Smooth And Strong

Quarter Master brings race-winning clutch technology to the street with a new 10.4-inch two-disc LS clutch. These clutches deliver a nearly stock pedal feel and are capable of handling 1,400 horsepower and 1,000 lb-ft of torque. Now, with lessons learned from racing, and with the data from extensive driveability testing, LS clutches are available for street use in the fifth-gen V-8 Camaro. Both the race and street versions feature a spring designed to require only a 10 percent increase in pedal effort over stock, with stock-type modulation control. The street version features sprung hub, marcel-type discs with organic rag-type friction for smooth engagement. Each clutch is completely rebuildable and can be used with the OE hydraulic bearing system or Quarter Master's Tri-Lite II hydraulic release bearing. To learn more, go to quartermasterusa.com or call 888.258.8241.

Camp 1301 01 January 2013 Parts Bin Quarter Master Two Disc LS 1/13

Let It Flow

Aeromotive is proud to announce the release of their new 340 Stealth Fuel Pumps. These high-output, in-tank, electric fuel pumps are direct bolt-in replacements for more than 65 popular EFI applications. The 340 is ideal for use as a universal replacement for applications that require more flow to support forced-air power-adders such as turbochargers and superchargers. What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. At 40 psi the 340 boasts more than 340 lph. This pump is ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. For more information, call Aeromotive at 913.647.7300 or visit aeromotiveinc.com.

Camp 1301 02 January 2013 Parts Bin Aeromotive 340 Stealth Fuel 2/13

Monster Lugs

Mackin Industries is proud to introduce Monster Lug, a new brand for domestic performance vehicles. Monster Lug offers racing lug nuts manufactured out of SCM435 steel. This durable and hard steel lug features an open-end design for racing studs along with a knurled end for grip during install/removal and are offered in a variety of colors to suit the taste of each performance vehicle owner. For more information, go to monsterlug.com or call them at 562.946.6820, ext. 115.

Camp 1301 03 January 2013 Parts Bin Mackin Industries Monster 3/13

Performance Wheel

Boze Forged is proud to introduce their latest creation: the Performance wheel. This bold V-shape seven-spoke style is blended into a multi-spoke design. Each spoke is accented with a unique ball-mill cut to highlight the spoke shape. All wheels are custom-built for each application to fit big-brake kits, staggered stance, and custom offsets. A complete assortment of sizes are available with diameters ranging from 17 to 24 inches and widths from 7 to 15 inches for performance and custom vehicles. Many special finish options are available such as polished, brushed satin, powdercoated colors, and more. For more details, call Boze Forged at 866.634.4626 or visit them online at bozeforged.com.

Camp 1301 04 January 2013 Parts Bin Boze Forged Performance 4/13

Armed and Ready

Improve handling and front end stability in your ’67- 69 Camaro with an A-arm package from BMR Suspension. Manufactured from 1.25-inch and 1.5-inch DOM tubing and laser-cut 3⁄16-inch mounting plates, both arms feature low-deflection, internally fluted polyurethane bushings with easy-to-access grease fittings. The upper A-arms feature offset CNC-machined cross-shafts to provide a thinner shim stack for lowered vehicles. These A-arms feature four additional degrees of positive caster for increased high-speed stability and increased camber gain while turning. The upper A-arms (PN AA005) and lower A-arms (PN AA006) are also sold individually and are available in red and black hammertone powdercoat finishes. For more information, visit bmrsuspension.com, or call 813-986-9302.

Camp 1301 05 January 2013 Parts Bin BMR Suspension A Arm 5/13

Convenient Cart

Having the right tools helps to get the job done right. Eastwood’s new Multi-Unit Welding Cart holds a welder and a plasma cutter, and is designed to keep everything needed for welding projects all in one place. The top shelf holds the MIG135, MIG175, or the TIG-200 welder. The design allows for the side access door on the MIGs to be opened without taking the welder off the cart. The middle shelf allows storage of necessary welding accessories, while the bottom shelf holds the Versa Cut Plasma Cutter. There is also a cutout in the rear of the cart for the plasma cutter cable. For more specs and further information, go to eastwood.com/cp113 or call 800.343.9353.

Camp 1301 06 January 2013 Parts Bin Eastwood Multi Unit Welding 6/13

Pedal Power

If you are building a race or Pro Touring Camaro, check out Wilwood’s new Adjustable Reverse Mount Pedal assembly or the new Forward Mount Pedal Assembly that combines the brake and clutch pedals together in one unit. The Reverse Mount Pedal Assembly positions the master cylinders to the inside of the firewall, while the Forward Mount Pedal Assembly positions the master cylinders to the outside of the firewall. Both units feature an all-aluminum frame and forged aluminum pedal arms with ladder-style construction. Also included with the assembly of your choice are the mounting studs, hardware, clevis, and pivot pin balance bar, which are designed to provide smooth and accurate settings of the brake pedal bias. For more information, contact Wilwood Engineering at 805.388.1188 or visit the wilwood.com website.

Camp 1301 07 January 2013 Parts Bin Wilwood Adjustable Reverse Mount Pedal 7/13

DIY Paint System

Summit Racing’s Low VOC 2-Stage Paint System gives DIY’ers a quality basecoat/clearcoat paint that can be applied at home. It conforms to many state and local regulations governing automotive paints and comes in 40 colors to choose from. Summit Racing’s Low VOC Paint System is formulated with fewer volatile organic compounds (VOCs) to comply with environmental regulations, including California. Even better, the Low VOC Paint System provides a professional-quality finish that can be sprayed in a home shop. Order online at summitracing.com or call Summit Racing at 800.230.3030.

Camp 1301 08 January 2013 Parts Bin Summit Racing Low VOC Stage Paint 8/13

Bitchin Hinges

Ringbrothers custom billet aluminum door hinges are now available for the ’70- 81 Camaro. Ringbrothers second-gen door hinges are anodized for a look you can’t get anywhere else. Machined from 6061-T6 billet aluminum, these direct replacements offer excellent fitment, easy installation, and eliminate door sag. No modifications are necessary and installation hardware is included. Get more info at ringbrothers.com or call 608.588.7399.

Camp 1301 09 January 2013 Parts Bin Ringbrothers Custom Billet Aluminum Door 9/13

Pedal Pad

Hawks Third Generation is happy to announce the release of the ’93- 02 Camaro and Firebird Gas Pedal Pad. This has been a long-awaited reproduction part for the ’93- 02 Camaro and Firebird owners. The pad retails for $14.95. For more information, visit Hawks Third Generation at hawksthirdgenparts.com or call them at 864.855.2694.

Camp 1301 10 January 2013 Parts Bin Hawks Third Generation Gas Pedal 10/13

Just Skip it

If you have a T56 transmission, when shifting fast from Second to Third gear, there is the problem of sometimes ending up in Fifth. That’s a disaster at full throttle. The Skip5-6 can save you from missing the shift that could destroy your clutch, engine, or tranny. When you push down on the ring of the Skip5-6, it instantly blocks out the Fifth/Sixth gate. You won’t miss Third and accidentally go into Fifth when power shifting in the heat of the moment. Perfect for drag racing, road racing, or aggressive street driving. After you have shifted into Fourth gear, pull the ring up (even under full throttle), and Fifth and Sixth gears are once again available. Fits B&M and Pro5 shifter – ’93- 02 F-body with T56. To order yours, go to skip5-6.com or call 209.339.8839.

Camp 1301 11 January 2013 Parts Bin Skip 5 11/13

Conversion Tank

Looking to convert your first-generation Camaro to EFI? Tanks Inc. has designed an affordable stock-style powdercoated gas tank ready for fuel injection. With the appearance of a stock gas tank, this one has all the internal baffling needed for late-model engines. In addition, it features a recess for the fuel pump and sending unit to ensure there is adequate space for all the necessary fuel lines and wiring with no modification to your floor. Tanks Inc. has replaced the factory sending unit with the standard SAE five-bolt sending unit to make gauge swapping a snap. The tank, pump, and sender retails for $465 for the ’67- 68 Camaro and $475 for the ’69. For more information, contact Tanks Inc. at 877.596.3842 or click on over to tanksinc.com.

Camp 1301 12 January 2013 Parts Bin Tanks Inc Powdercoated Gas 12/13

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

TO TOP