May 2011 Parts Bin

View Full Gallery

Link Up

Camp 1105 01 Z Hotchkis Sport Suspension May 2011 Parts Bin 2/17

The fifth-generation Camaro benefits tremendously from basic suspension modifications, including sport sway bars and sport springs. However, the factory sway bar end links are not designed for maximum performance and adjustability. New Heavy Duty End Links from Hotchkis Sport Suspension are an easy, bolt-on solution to the problem thanks to aircraft-quality materials, rugged construction, and track-ready adjustability.

The suspension engineers at Hotchkis designed this high-quality, adjustable end link set specifically for the Camaro. Front and rear links feature high-quality three-piece PTFE lined heim joints for smooth quiet operation, specially machined metric high-articulation spacers, zinc-coated grade-10.9 hardware and CNC-machined aluminum sleeves with machined wrench flats. An excellent upgrade for your ’10 or ’11 Camaro with Hotchkis sway bars, the adjustable design allows you to corner balance the suspension. For more information, call Hotchkis Sport Suspension at 866-735-6422 or visit them online at www.hotchkis.net

Easy HP

Camp 1105 02 Z Airaid Intake May 2011 Parts Bin 3/17

Airaid Filter Company is proud to announce the release of the new MXP Intake Systems for the all-new ’10- 11 Chevrolet Camaro V-6 and V-8 LS3/L99 engines. Engineered to deliver serious horsepower and torque gains, Airaid’s newest kits add an additional 16 hp and 13 lb-ft of torque for the V-8 engine and 11 hp and 14 lb-ft of torque for the V-6 engine.

Each kit comes with all the necessary hardware, easy to follow instructions and their no-hassle warranty. For more information or to find an Airaid dealer near you call 800-498-6951 or visit them on the web at www.airaid.com.

Carbon Spoiler

Camp 1105 03 Z Anvil Auto Carbon Fiber Spoiler May 2011 Parts Bin 4/17

Anvil Auto designed a carbon fiber rear spoiler for the fifth-gen Camaro that mirrors its notched front end, while continuing the subtle character lines running from the C-pillars back over the deck. Where the stock unit stops short at the sides of the trunk opening, this one continues over the rear quarters and conforms nicely with the rear-end styling of the car. It uses the same stud locations as the factory spoiler and comes with neoprene pads under the overhanging ends. Spoilers are available in both, gloss, or satin finishes. For great carbon-fiber products go to www.anvilauto.com or call them at 888-723-8882.

Performance Brake Upgrade

Camp 1105 04 Z Wilwood Brakes May 2011 Parts Bin 5/17

The versatile Wilwood W6AR forged billet radial mount caliper is unmatched in its class for superior stopping power and rugged durability. New bolt-on Wilwood big brake kits for the ’10 and ’11 Camaros are configured for high-performance street and show, or professional-level track competition for use in conjunction with wheel, tire, and suspension upgrades. Complete kits include W6AR calipers, 14.25-inch diameter SV-GT competition or SV-SRP drilled and slotted street performance rotors, aluminum rotor hats, matched high-performance Wilwood brake pads, and radial-mount caliper bracket kits with premium-grade fasteners to mount the calipers to the stock attachment points. For more information contact Wilwood Engineering at 805-388-1188, or visit their website at www.wilwood.com.

Programming Performance

Camp 1105 05 Z Diablosport May 2011 Parts Bin 6/17

DiabloSport is proud to offer the all-new Trinity Performance Monitor. The Trinity will support ’99-’11 Ford, Chrysler/Dodge, and GM vehicles both Gas and Diesel. All applications will be supported under a single part number, T-1000. Some of the many features include programming, diagnostics, read/clear trouble codes, virtual drag strip, virtual gauges and customizable gauge layouts. All of these features are accessible through Trinity’s high-resolution full-color touch screen display. For more information go to www.diablosport.com or call them at 877-396-6614.

Fifth-gen 9-inch Conversion Kit

Camp 1105 06 Z Drive Shaft Shop May 2011 Parts Bin 7/17

The Drive Shaft shop is proud to announce the release of the new ’10 Camaro 9-inch Rear Conversion Kit. Using a steel case with rear mounts TIG-welded on, and a front mount that connects to the original five pinion bolts on the 9-inch center section. Due to the variety of differentials and spools available, they supply the 9-inch case while you decide what center section would be best for your needs (center section supplied upon request). This kit utilizes all three original mounting points for the factory differential. Included with the kit are a powdercoated differential housing with rear bracket and poly bushing, powdercoated front mount with poly bushing, two 31-spline differential stubs with O-ring bushings (guaranteed for up to 1,400 hp), two DSS Pro-Series 1,400 hp fatty axles with 30-spline center shafts and REM polished CV internals, and a proven driveshaft. For more information, call The Driveshaft Shop at 800-564-2244 or check them out online at www.driveshaftshop.com.

Stick it!

Camp 1105 07 Z Hurst Shifter May 2011 Parts Bin 8/17

Hurst Shifters is excited to announce the new Comp Stick kit for the ’10-and-newer Chevrolet Camaro. The stylish console plate is CNC-machined out of billet 60661 T6 aluminum and anodized in black. There are cut outs on both sides of the plate for the gear indicator, making it ideal for both left and right hand vehicles. The handle and stick are also made from billet 6061 T6 aluminum and are anodized in a Titanium Shadow finish. The shifter is simple to install and requires no modification to your stock console. The stick plate can be purchased separately. For more info, call Hurst at 818-882-6422 or visit them on the World Wide Web at www.hurst-shifters.com.

Straight Through Performance

Camp 1105 08 Z Magnaflow May 2011 Parts Bin 9/17

MagnaFlow Performance Exhaust offers a new stainless steel cat-back exhaust system for the ’10 6.2L V-8 Chevrolet Camaro (PN 16482). The muffler design utilizes MagnaFlow’s straight-through philosophy for a generous reduction in backpressure and a performance increase in both horsepower and torque. Bolting on directly after the catalytic converter, this system consists of 2.5-inch mandrel bent tubing and MagnaFlow’s polished stainless steel muffler, featuring 2.5-inch stainless steel tips for a high-performance look. All MagnaFlow stainless steel exhaust components are manufactured to ISO 9001 quality standards and include a lifetime warranty. For more information and to hear high-quality sound clips, and see dyno results visit www.magnaflow.com. You can also call them at 949-858-5900.

Twin-Screw HP

Camp 1105 09 Z Vortech Superchargers May 2011 Parts Bin 10/17

The new Lysholm 2300 supercharger system from Vortech develops up to 620 hp for the ’10- 11 Camaro SS. The Lysholm twin-screw design supercharger has a cast aluminum air inlet manifold and six-rib pulley and features an integrated bypass valve and actuator. For more information on getting your Camaro to the next level, contact Vortech Engineering at 805-247-0226 or click on over to www.vortechsuperchargers.com.

Pump it Up!

Camp 1105 10 Z Meziere May 2011 Parts Bin 11/17

Camaro owners will be glad to know the engineers at Meziere have been hard at work to produce an electric pump for their new performance vehicle. No shortcuts were taken to design and build this beauty. Boasting an industry topping 55 GPM flow rate, this pump is an ideal upgrade for owners looking to gain 11-14 RWHP. It incorporates an idler to make installation easy and your existing accessories functional. They also provide heater and bypass connections. Call Meziere at 760-746-3273 or visit them online at www.meziere.com for more information.

Wheel Revolution

Camp 1105 11 Z Grant Products Wheel May 2011 Parts Bin 12/17

Grant starts with the OEM Factory Core and then works some magic to give your new airbag-equipped Camaro a safe and legal alternative. Simply reinstall your factory airbag along with any of your original factory switches into the Grant Revolution Wheel. For more information on the Revolution Steering Wheel, call Grant Products at 800-9526947, or go to www.grantproducts.com.

Street radials

Camp 1105 12 Z Mickey Thompson Tires May 2011 Parts Bin 13/17

Mickey Thompson has just added new 19- and 20-inch sizes to the ET Street Radial II line, perfect for new American Muscle car applications like the ’10- 11 Camaro. New sizes include P305/35R19 and P305/35R20. For more information, call Mickey Thompson Performance Tires and Wheels at 800-222-9092. You can also click on over to www.mickeythompsontires.com.

New Vintage

Camp 1105 13 Z Retro Usa May 2011 Parts Bin 14/17

Retro your ride with Chrome-Tech bumpers and hood vents from Retro USA. This is not just a bumper cover. Inspired by the icons of the ’60s and ’70s, yet designed with the latest technology. Chrome-Tech Accessories are constructed using chrome film laminated to TPO, the gold standard in automotive plastic, and is guaranteed to not rust, crack, chip, or peel. Chrome-Tech Bumpers mount to existing fascia with two pre-taped thermoformed inserts. No permanent modifications to the vehicle are required and they fit all ’10- 11 Camaro models. The ’68- 69style hood vents give your Camaro a nostalgic and aggressive look. Hood vents are chrome-plated, injection-molded ABS with painted flat black accents. Pre-taped with 3M attachment tape plus pigtails ensure easy and accurate installation. For more information call Retro USA at 877-473-8768 or visit their website at www.retrousa.net.

Insert Here

Camp 1105 16 Z Eddie Motorsports May 2011 Parts Bin 15/17

Enhance the appearance of your new Camaro with a set of fifth-gen Camaro Side Vent Inserts from Eddie Motorsports. Manufactured from heavy gauge stainless steel in the USA, these inserts are sold in a set of six pieces and install with 3M double-sided tape (included). The Eddie Motorsports Camaro Side Vent Inserts are available in polished, or any of Eddie’s many Fusioncoat colors. For more information go to www.eddiemotorsports.com or call them at 888-813-1293.

Stand out!

Camp 1105 15 Z Lpi Window Louvre May 2011 Parts Bin 16/17

LPI has just introduced two styles of their own rear window louver. The Conventional version has a retro style inspired by design from the ’70s, while the Innovative version provides a truly 21st-century look. These louvers are made in North America from laser-cut aluminum and are test fitted with great care to ensure a snug and proper fit. Each louver kit comes complete with all necessary installation hardware. This is a sleek accessory that will make a nice addition to your fifth-generation Camaro. Call Limited Parts Industries at 514-562-1970 or visit them online at www.eddiemotorsports.com for more information.

Show Stopping Engine Bay

Camp 1105 14 Z Showstopper Accesories May 2011 Parts Bin 17/17

Showstopper accessories is now offering a wide variety of custom Camaro products to add that personal touch underneath your hood. Premium covers are available for your fuse box, brake fluid reservoir, positive battery terminal, ABS controller, and wire harness. All items are custom painted as well as accented with the color and material of your choice. If you can imagine it, they can do it. For more information visit them online at www.showstopperaccessories.com or call 888-588-4067.

« Prev 1 2 3 Next »

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

subscribe to the magazine

get digital get print
TO TOP