Door Handle Shaving Guide - Pop This!

Shaving Door Handles Got Simpler Thanks To This Kit From Electric Life

Mike Harrington Apr 1, 2009 0 Comment(s)

After the wiring and installation comes the more time consuming process of shaving the door handles. And that is actually the shaving part. We tried two different methods on this Camaro. On the passenger's side, I cut out the keyhole and the handle as one piece and created a patch panel the exact size then MIG welded it in. On the driver's side, smaller patch panels where the door lock and handle used to be were fashioned and welded directly over the holes. The later was the best method. I'll explain why in a minute.

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

subscribe to the magazine

get digital get print
TO TOP