Finally, position the lens gasket and reinstall the lens. (Do not over-tighten the lens screws.) Reconnect the negative battery cable and fire up your new killer lights. Before hitting the road, be sure to test all stoplamps, blinkers, and high and low beams. As a side note, we were amazed at the ease of the installation and great instructions. You can be up and running within a few hours with a minimal amount of tools and experience. Not only are these lights bright, but they also add beauty to a car that already has plenty of curb appeal.
'55-57 Chevy Headlights And Taillights - Brighten The Future Of Your Tri-Five
With a little help from American Autowire, you'll be able to see where you're going and those behind you will know you're stopping faster
Danchuk Manufacturing Inc.Santa Ana, CA 92705