Due to the EU’s Global Data Protection Regulation, our website is currently unavailable to visitors from most European countries. We apologize for this inconvenience and encourage you to visit www.motortrend.com for the latest on new cars, car reviews and news, concept cars and auto show coverage, awards and much more.MOTORTREND.COM
Subscribe to the Free

Beefing Up The 10-bolt

Moser's 10-bolt upgrade kit gives you the strength to keep pushin' on

Jul 26, 2007

There's nothing like having the confidence of knowing your hot rod's got the strength to handle almost anything you can, or plan, to throw at it. Especially the rearend. If you participate in any kind of straight-line racing, or any kind of racing for that matter, you'll need a set of beefy gears that can hang tough through a long day at the track. Merely bolting on a set of drag tires or slicks can play havoc on a flimsy factory 10-bolt. Add into the equation some VHT, or any other traction enhancer and you're just asking for trouble.

Even on the street, a set of fat, sticky tires coupled with some uneven pavement could result in a ring gear teeth-shattering episode at the hit of the throttle.

Simply put, more traction means more stress on your driveline components.


01 To get started, Mike removed the old cover. Be pre-pared with a container underneath to capture the used oil.

One remedy is to ditch the stock 10-bolt and scour the swap meets for a used 12-bolt setup. This could take more time than you're willing to invest, could induce sore feet, and there's a good chance you'll be driving home empty handed. And, if you do happen to find one in good shape, it may be rough on your wallet as well.

Aftermarket companies that offer 12-bolts are an excellent source, as they offer a plethora of high-quality units. But if your racing budget is slightly less than your grocery bills, this route may cost a bit more coin than you're willing to spend on your "little hobby."

For our purposes we'll be upgrading a factory 10-bolt rearend with Moser's 1970-and-later 10-bolt upgrade kit for factory late-model GM passenger cars. It uses an 8.5 diameter ring gear (vs. the 8-7/8-inch 12-bolt) and stronger 30-spline axles (vs. the stock 28-spline) and added a 30-spline posi unit. This is a drag car, so we went with 4.88 gears and a C-clip eliminator kit, which adds safety in the case of a broken axle. If such an accident were to happen with this system, the wheel would remain bolted to the backing plate.


02 Next up was to remove the driveshaft by removing the u-bolts from the yoke.

To top things off we added the Moser cast-aluminum performance cover. Not only does it look great, it incorporates preload screws for bearing cap support, added strength and also eliminates deflection.

For this installation, Moser included Richmond gears and a Detroit Truetrac limited slip differential. This will provide us with plenty of strength (about 50 percent over stock components) necessary for our high 10-second 1980 drag Camaro.

We could have gone with a brand new Moser 12-bolt as a legitimate option for even more strength (the housing is stronger than an original factory, and the tubes are welded in a full 360 degrees and are 1/4-inch thick, as opposed to the 1/8-inch thick factory housing), but we wanted to show what's available for a bit less dough. The Moser 10-bolt upgrade costs just about half, give or take, than the complete Moser 12-bolt system, and will provide plenty of strength for our needs.

We enlisted the installation services of Mike Bastio from Toy Shop Transmissions in Pomona, California. Mike informed us that labor for an install like this will vary from shop to shop, but suggested that you put aside another $400 if you have someone else do the work.

Although we'll be using this unit in a drag racing situation, we highly recommend this upgrade for street use as well. With today's high-performance engines making more horsepower than ever before, you can't afford not to pay attention to your assets. So don't take a chance, or you could risk losing your rear ... end.


Moser Engineering
Portland, IN 47371
Toy Shop Transmissions
Pomona, Ca 91766



Connect With Us

Get Latest News and Articles. Newsletter Sign Up

sponsored links

subscribe to the magazine

get digital get print