Big-Block Cylinder Heads - Head Trip, Part 2

Big-block heads for the spendthrift builder

Mike Harrington Jun 22, 2007 0 Comment(s)
Sucp_0706_13_z Chevy_small_block_cylinder_heads Summit_racing 1/17

Oxymoron. Webster's dictionary defines this word as: "a combination of contradictory or incongruous words (as cruel kindness); broadly: something (as a concept) that is made up of contradictory or incongruous elements."

Besides "cruel kindness" here are some other examples: adult male, authentic replica, honest politician, jumbo shrimp, and military intelligence. For a long time, people would put the phrase "budget big-block" in there, too. But a little research proved there are very good values out there for those building a Rat with an eye on cost conservation.

In the last issue of Super Chevy, we went down the list of cylinder head manufacturers and got the latest dope from each company on their most popular off-the-shelf small-block cylinder heads. Mind you, we also informed each company that our aim was to search out their best "cost-conscious" cylinder heads. This month, we searched out those same parts for Chevy's fabled Rat motor. Yes, it's true that when one dives into the big-block waters, budget is a word that seldom comes to mind. Budgets, however, are like waist sizes-they vary from person to person. If only our wallets were akin to our waist sizes, what a wonderful world this would be.

It turns out that purchasing a set of BBC cylinder heads won't require you to sell a kidney on the black market; they're more affordable than you may think. When purchasing a set of cylinder heads, most DIYers prefer the out-of-the-box, preassembled units. Unless you're running some insanely wild cam, the springs and valves in the preassembled heads are capable of delivering some great performance numbers over the OE-spec heads. In no particular order, here are the companies we contacted and the information they provided.

Sucp_0706_01_z Chevy_big_block_cylinder_heads World_products 2/17

World Products
(631) 981-1918
www.worldcastings.com

Merlin Cast Iron 269cc BBC Cylinder Head, Merlin III Cast Iron 320cc BBC Cylinder Head

World has a couple of BB heads that are perfect for the budget builder. The first one is the assembled Merlin oval port cast iron head, with a 269cc intake volume, a 119cc combustion chamber, 2.300x1.88 valves and 11/32 guides. Out of the box these heads run about $720. The next step up is the Merlin III. This head features a 320cc intake chamber and opens up to a 345cc intake chamber. The combustion chamber, valves and guides are the same as the Merlin. An assembled set of the 345cc heads will run about $1,459.

Sucp_0706_02_z Chevy_big_block_cylinder_heads Racing_head_service 3/17

Racing Head Service
(877) 766-4323
www.racingheadservice.com

Pro Action Cast Iron 320cc Cylinder Head, 360cc BBC Cylinder Head

Racing Head Service knocked one out with its Pro Action cast iron heads. The Pro Action heads come in a 320cc and 360cc intake runner. Both heads feature a 119cc combustion chamber with intake valves (with hardened seats) that measure 2.250 and exhaust valves that measure 1.880. A pair of assembled 360cc heads built for a hydraulic roller cam runs about $1,810. The same set built for a mechanical roller runs about $2,064.

Sucp_0706_03_z Chevy_big_block_cylinder_heads Summit_racing 4/17

Summit Racing Equipment
(800) 230-3030
www.summitracing.com

Square Port Iron 308cc BBC Cylinder Head

Millions have ordered parts from Summit Racing, but some may not be familiar with the fact that Summit also offers its own line of cylinder heads for the Chevy big-block. Summit has set of cast-iron heads that are ready to run from the moment you open the box. The Summit square port iron heads feature a 308cc intake runner with a 119cc combustion chamber, a 2.250 intake valve and a 1.880 exhaust valve with hardened seats. A pair of assembled heads runs about $1,291.

Sucp_0706_04_z Chevy_big_block_cylinder_heads Brodix 5/17

Brodix
(479) 394-1075
www.brodix.com

Race Rite BB-R 294cc, BB-O 270cc BBC Cylinder Head

Brodix has a direct replacement for stock cast-iron heads. These heads from its Race Rite series are made from cast aluminum and are available in rectangular or oval port castings. Brodix has also designed the Race Rite heads to work directly with the stock pistons and intake manifold. The Race Rite heads come in two available sizes: the BB-R comes with a 294cc intake port while the BB-O comes with a 270cc intake port. Both heads have a 119cc combustion chamber, a 2.250 intake valve, and a 1.880 exhaust valve. An out-of-the-box assembled pair of the Race Rite heads runs approximately $1,939.

Sucp_0706_05_z Chevy_big_block_cylinder_heads Holley 6/17

Holley
(270) 782-2800
www.holley.com

Aluminum Oval Port 261cc Intake BBC Cylinder Head

Holley gets it done with a pair of aluminum oval port heads that have been CNC-machined. They are made for engines made from 1965 to 1975 with EGR (pn 300-556), and without EGR (pn 300-554). The Holley heads have 261cc intake and 110cc combustion chamber that are designed for low compression pump gas use. These heads come with a 2.19 and 1.88 intake and exhaust valves and stock location exhaust ports. An assembled set of heads will run about $2,200.

Sucp_0706_06_z Chevy_big_block_cylinder_heads Jegs 7/17

Jegs
(800) 345-4545
www.jegs.com

"J" Series Cast Aluminum 310cc BBC Cylinder Head

Jegs High Performance not only sells just about any performance part you can think of, it also sells its own performance Rat heads. Jegs "J" series of BBC heads are cast aluminum and CNC-machined for a precise fit. These square port aluminum heads feature 310cc intake runners, as-cast 119cc combustion chambers and raised exhaust ports (.625-inch). Jegs uses longer valves so you will need to check pushrod length. A pair of assembled "J" series heads retails at $1,779 (base price).

Sucp_0706_07_z Chevy_big_block_cylinder_heads Air_flow_research 8/17

Air Flow Research
(877) 892-8844
www.airflowresearch.com

Magnum 325cc BBC Cylinder Head

AFR's Magnum heads are available with a variety of upgrades, ranging from intake port sizes starting at 305 cc all the way to 357 cc. The upgrades are almost too numerous to list, so we'll take a look at the as-cast, CNC bowl-blended, aluminum Magnum 325cc intake port head. This particular head comes with the standard 119cc combustion chambers, 2.250 intake valves and 1.880 exhaust valves. Should you desire a fully CNC'd set of heads from AFR, all you have to do is ask. A pair of the 325cc heads usually retails for around $2,485.

Sucp_0706_08_z Chevy_big_block_cylinder_heads Edelbrock 9/17

Edelbrock
(800) 416-8628
www.edelbrock.com

Oval Port Aluminum Performer 290cc BBC Cylinder Head

The Edelbrock Performer series of cylinder heads really needs no introduction. The oval port aluminum Performer heads feature 290cc intake ports and 110cc combustion chambers with 2.19 and 1.88 intake and exhaust valves. The Performer is a great streetable head and retails for about $1,920.

Sucp_0706_09_z Chevy_big_block_cylinder_heads GM_performance_parts 10/17

GM Performance Parts
(877) 892-8844
www.airflowresearch.com

Oval Port Aluminum 290cc BBC Cylinder Head

GMPP has a pair of great aluminum oval port heads featuring 290cc intake runners and 110cc combustion chambers and 2.250 and 1.880 intake and exhaust valves. The exhaust ports are in the stock location so there's no need to mess around with new headers. Out of the box, an assembled pair of these heads will run about $1,920.

Sucp_0706_11_z Chevy_big_block_cylinder_heads Trick_flow 11/17

Trick Flow Specialties
www.trickflow.com
(330) 630-1555

Oval Port Aluminum 280cc BBC Cylinder head

Trick Flow also has a few big-block cylinder heads, but we will focus on its premier budget cylinder head, the oval port aluminum version. It helps build great low- to mid-range horsepower. These heads have 280cc intake runners and 113cc combustion chambers. An assembled set of these heads runs approximately $1,925.

Sucp_0706_10_z Chevy_big_block_cylinder_heads Powerhouse 12/17

Powerhouse Engine Components
(661) 861-0167
www.enginekits.com

Cast Aluminum 320cc BBC Cylinder Head

Powerhouse surprised us with a set of cast aluminum big-block heads that feature 320cc intake runners and 115cc combustion chambers. The intake and exhaust valves measure in at 2.25 and 1.88 respectively. These heads are assembled for hydraulic flat tapped lifters, and upgrades are available, so give them a call. An assembled set from Powerhouse will cost $1199.

Going Back To Last Month
Editor's note: Due to circumstances beyond our control, the following text and photos from part 1 of this story (which dealt with small-block cylinder heads) were left out of the May issue. Here is the conclusion of Head Trip, Part 1, in its entirety. We apologize for the error.

Sucp_0706_12_z Chevy_small_block_cylinder_heads Jegs 13/17

JEGS
(877) 892-8844
(800) 345-4545
www.jegs.com

High-flow 197cc Aluminum SBC Cylinder Heads, 220cc Aluminum SBC Cylinder Heads

These heads are designed to support 425-500 hp in 350-406ci engines. They feature large, high quality stainless steel 2.055-inch intake and 1.600 exhaust valves. According to Jegs, the intake port cross-section was designed for good mid-range power. The heads work well with cams featuring duration of 210-240? @ .050 inches. 197cc Intake runners, 1.440-inch springs, 1.875-inch installed height, 130-pound seat pressure, 3/8-inch studs, and 5/16-inch guideplates included; 2.055-inch intake/1.600-inch exhaust. Cost: $1,118 (197cc head).

Jegs also has a 220cc high-flowing aluminum head. It features 220cc intake runners, 240 pounds seat pressure, .680-inch maximum lift, 64cc CNC-machined combustion chambers with angle plug design, 10? locks, steel retainers and bronze guides, 2.100-inch intake and 1.600-inch exhaust stainless steel valves, 7/16-inch rocker studs and 5/16-inch guide plates. Cost: $1,372 (220cc head).

Sucp_0706_14_z Chevy_small_block_cylinder_heads Summit_racing 14/17

Summit Racing Equipment
(800) 230-3030
www.summitracing.com

Summit 170cc Cast-iron Vortec SBC Cylinder Head, Summit Street & Strip 200cc Aluminum SBC Cylinder Head

Are you looking for a good set of heads to up the performance factor of your Vortec engine? Summit Performance Vortec cylinder heads have what it takes to get the job done. Featuring wide-open intake runners, efficient combustion chambers, and a high-performance valve job, these heads deliver plenty of power-building airflow. Made from superior iron alloy, these heads come ready-to-run for improved performance straight out of the box.

Specs: cast iron cylinder head material; combustion chamber volume 67cc; intake runner volume 170cc; intake valve diameter 1.940 inches; exhaust valve diameter 1.500 inches; maximum valve lift 0.520 inches; outside diameter of outer spring 1.250 inches. Cost: $649 (both 170cc and 200cc).

Sucp_0706_15_z Chevy_small_block_cylinder_heads Trick_flow 15/17

Trick Flow Specialties
(330) 630-1555
www.trickflow.com

Trick Flow 195cc Aluminum SBC Cylinder Head

Dyno-tested on a 383ci engine, Trick Flow's 64cc 23? 195cc aluminum cylinder heads made 460 hp and 451 lb-ft of torque-40 more horsepower and 11 lb-ft more torque than the same engine with GM L98 Corvette heads. The 195 heads are a direct fit, high-performance replacement for most original equipment factory heads, and accept most factory accessories. They feature a choice of 62cc as-cast, or 64cc and 72cc CNC-profiled combustion chambers, 2.02/1.60 stainless steel valves, hardened exhaust valve seats for unleaded gas, and 195cc intake ports with a high-velocity, small cross-section design to promote low-rpm torque without sacrificing higher-rpm horsepower. The heads are available with three spring sizes: 1.250-inch single for cams up to .480-inch lift; 1.470-inch single for cams up to .540-inch lift; and 1.460-inch dual for cams up to .600-inch lift. They come fully assembled with valves, valve springs, locks, retainers, rocker arm studs, and guideplates. The heads are 50-state emissions-legal under CARB E.O. number D-369-4. Cost: approximately $1,249 (assembled).

Sucp_0706_16_z Chevy_small_block_cylinder_heads Edelbrock 16/17

Edelbrock
(310) 781-2222
www.Edelbrock.com

Performer 170cc Aluminum SBC Cylinder heads

The key to any successful engine buildup lies in using parts that work together, and Performer RPM cylinder heads are designed specifically for street-driven cars with moderate compression and pump gas. The high velocity 170cc intake ports produce outstanding throttle response and torque, with enough air flow to produce over 400 hp when used with matching a Performer RPM manifold, cam, and carb. The Performer RPM head #60899 comes fully assembled and ready to run with 2.02/1.60-inch stainless steel valves; valve springs rated up to .575-inch lift; 64cc combustion chambers; 60cc exhaust ports; and straight spark plugs for use with standard exhaust headers. Performer RPM small-block Chevy heads are also available bare, or complete with 70cc combustion chambers and angled spark plugs. Like all Edelbrock heads, they're cast at the Edelbrock Foundry from 356-T6 aluminum and incorporate Heli-Coil inserts in the rocker stud and exhaust bolt holes for strength and durability. Cost: The MSRP is $1,648, but check with your local Edelbrock dealer for more info.

« Prev 1 2 3 Next »

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

subscribe to the magazine

get digital get print
TO TOP