ZZ502 Big-Block Engines - Big-Block Bolt-Ons

The ZZ502 Is A Great Crate Engine, But It Can Be Even Better With Just A Few Upgrades.

View Full Gallery

Crate engines have really made upgrading our Camaros easy. Grab a keyboard, or pick up a phone if you roll old school, and in a few days, a big ol' crate will show up full of mechanical goodness. It couldn't be any easier. The downside is that, compared to a custom engine, you may not get exactly what you want. GM Performance Parts (GMPP) must have understood this when developing its line of ZZ502 big-block engines. Sure, you can order both basic and deluxe engines fully assembled (PN 19201332 deluxe) and ready to rock, but for those who like to spin a wrench and save money, there's another option: the ZZ502 kit (PN 1231171 deluxe). Like it's fully assembled cousins, the ZZ502 in kit form comes in both basic and deluxe versions. If you want it all, including starter, water pump, spark plugs, plug wires, distributor, carb, and everything else needed, then go with the deluxe kit for the simple reason that it beats hunting around for stuff, and you'll be assured it's designed to work together. Getting the engine in kit form also has two other benefits. First, you'll save right around $400. We don't know about you but, for the few hours it will take to assemble the engine, that's a pretty decent savings. Secondly, it's perfect for the gearhead who wants to add a bit more performance to GM's already-potent package.

Camp_1007_02_o Zz502_big_block_engines Big_block 2/21

We were curious what a couple of upgrades would do for the big-inch big-block in terms of power. Now, we didn't want to tear into the short-block since it came fully assembled, but cleaning up the as-cast aluminum heads seemed like a logical place to grab a bit more power. We also thought the GM cam specs seemed a bit on the tame side, so sliding in a bigger bumpstick was another easy path to better performance. In addition we decided to ditch the one part on the crate engine that we weren't thrilled with-the stamped steel rockers. Swapping over to a roller rocker would increase power, reliability, and if we stuck with the same ratio, we wouldn't even have to buy new pushrods. Best of all, we already had $400 extra in our wallet to put toward these upgrades. With a pile of parts and a few ideas, we headed over to Don Lee Auto in Rancho Cucamonga, California. Owner Tim Lee isn't a television repairman, but he's still got this ultimate set of tools.

Camp_1007_03_o Zz502_big_block_engines On_the_dyno 3/21

Head Games
Packaged in the ZZ502 kit was a set of aluminum oval-port heads with 2.25-inch stainless intake valves, 1.88-inch stainless exhaust valves, 290cc runner volume, and 110cc combustion chambers. Good heads, but like all "as cast" cylinder heads, they can benefit for a little massage therapy. For this we took them to Tim's Porting in Santa Clarita, California.

Camp_1007_10_o Zz502_big_block_engines Heads 4/21

Sources

Don Lee Auto
Cucamonga, 91730
909-989-1573
www.donleeauto.com
Westech Performance
Mira Loma, CA 91752
951-685-4767
www.westechperformance.com
Chevrolet Performance Parts
Detroit, MI 48232
800-577-6888
www.gmperformanceparts.com
Spectre Performance
Ontario, CA 90761
909-673-9800
www.spectreperformance.com
Tim's Porting
661.251.4822
www.timsporting.com
« Prev 1 2 3 Next »

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

TO TOP