Camaro: Engines Drivetrain
Holley’s Mid-Mount Complete Accessory System solves a lot of LS engine swap issues and its tight configuration leaves more room in the engine bay. » Read More
We upgrade the driveline of a 750hp 1968 Camaro with a PerformaBuilt Level 3 Invincible 4L60E transmission and a QA1 carbon-fiber driveshaft. » Read More
Mark Stielow’s LT4-powered 1969 Camaro is used to develop long-tube and mid-length headers for cars outfitted with a Detroit Speed subframe. » Read More
John and his team provided great tech support, and John even spec'd the Turbonetics turbos, Turbosmart wastegates and blow off valves for us. » Read More
Wallet-Friendly Carbureted LS Transplant into a 1967 Camaro
We mix modern now and proven then to come up with a LS swap that’s easy on the wallet. » Read More
Installing the Vortech V-3 Si supercharger on a 2016 Camaro
Vortech’s V-3 Si blower infuses up to 775 horsepower into the 2016-’17 Camaro » Read More
Get More Horsepower with the Holley iNTECH Cold-Air Intake
Holley’s iNTECH cold-air intake system easily adds power to sixth-gen Camaros. » Read More
Camaro Resurrection: Bringing a Car Back to Life after Sitting for 20 Years
Some car projects become much more than just an exercise in coaxing an engine to life or cleaning a pile of corrosion underneath a stuck ... » Read More
Check out the new LT4 Swap in this 1970 Chevy Camaro!
With Forgeline wheels seemingly rolling on just about every pro-touring machine on the street or track, it was inevitable the Dayton, ... » Read More
Week To Wicked 1972 Camaro Pro Touring Build from Start to Finish!
One week, one car, stacks of parts, and a whole lot of effort to transform a boring 1972 Camaro into something special. » Read More
Week To Wicked Day 5: Finishing up and Firing up our week long project, complete with smoky burnouts!
Time is up and today is the day we turn the key and bring our week long Camaro project to life! » Read More
Week To Wicked Day 4: Moving Closer to Finishing Our 1972 Camaro
Day four has of grinding our way through the wiring process, installing LED lighting and installing the Dakota Digital HDX gauges. » Read More
Week To Wicked Day 2: Getting the Drivetrain into our 1972 Camaro
The Camaro becomes a roller again and gets a brand new, badass, drivetrain! » Read More
Week To Wicked 1972 Camaro Day 2: Chassis Wrap Up and Driveline Prep!
The Camaro is almost a roller again, so it’s time to start getting ready to drop in the new SDPC, Holley fed, LS mill. » Read More