C5 Corvette Throttle Body - Getting Dialed In

We Install A Vmax Motorsports Throttle Body On Project C5X

Alan Colvin Aug 3, 2009 0 Comment(s)
Corp_0909_01_z 2000_chevrolet_corvette Throttle_body_install 1/22

Project C5X back at Next Level Performance for another round of testing with a new VMax Motorsports throttle body.

Technical Assistance: Geoff Skorupa

Last month we talked about the how we were going to make some power with our almost-stock LS1 engine. Early in the project we decided the prudent use of our time and energy would be to build the stock engine we had in Project C5X instead of swapping in a brand new LS stroker. With that in mind, we decided to install a LS1X World Warhawk heads and a custom grind C4orce Comp Cams hydraulic roller camshaft and valvetrain. As most of you already know, a head and cam upgrade is one of the simplest and most productive upgrades for any car but especially so for the free-breathing LS1.

This month, we want to install a new throttle body to Project C5X and see what kind of horsepower it can mean to a near-stock Corvette. Pete Incaudo, owner of VMax Motorsports has been working with World Products for quite some time and knows their product line well. As we mentioned last month, Pete worked on the development side for the LS1X World Warhawk heads. While Pete is one of the best cylinder head guys in the country, he also knows engine air flow like nobody's business.

Corp_0909_03_z 2000_chevrolet_corvette Throttle_body_install 2/22

The ported inside of the VMAX modified LS1 throttle body. Notice the shaved down throttle shaft.

With over 40 years of airflow experience, Pete has also developed his own VMax Motorsports ported throttle bodies. VMax throttle bodies are available for all LS-applications on an exchange basis. All of his throttle bodies are CNC-machined to smooth the flow characteristics of the throttle body past the throttle plate while avoiding the tip-in stumbles that can plague other porting jobs. When you first see one of these throttle bodies, it looks more like a work of art than a part to make horsepower. We know we will have to modify the LS1X World Warhawk heads when we do the cam and head install so we decided we would do this TB install now to keep the results as simple as possible before the big wrenches have to turn. Let's jump right into the TB install.

Corp_0909_22_z 2000_chevrolet_corvette Throttle_body_install 21/22

We decided to run a check run to make sure we were in the same ballpark since it had been a while since we had Project C5X on the dyno. The first run produced 327.90 horsepower at 337.37 lb-ft of rear-wheel torque which was pretty close to where we needed to be. After the VMax TB install, the next dyno run produced 335.49 horsepower at 343.21 lb-ft of rear-wheel torque, picking up another 7 peak horsepower and almost 6 lb-ft of rear-wheel torque.

Sources

Next Level Performance
Altamonte Springs, FL 32714
407-869-7889
http://www.nlperformance.com
Mid America Motorworks
Effingham, IL
866-866-0856
http://www.mamotorworks.com
VMax Motorsports
813-469-4665
www.vmaxmotorsports.com
« Prev 1 2 Next »

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

subscribe to the magazine

get digital get print
TO TOP