For quite some time, I wanted to install air conditioning in my '67 big-block coupe, but since this is a numbers-matching car, I didn't want to cannibalize the interior or engine compartment to do it. Vintage Air had the solution I was looking for: a custom-made air-conditioning system very close in appearance and fit to the original GM factory air that was offered as an option in 1967. I particularly liked the fact that it was a "noninvasive" system that could be deinstalled if some future owner of this car wanted to put it back to its original condition (of course, I'm keeping all of the original parts for this eventuality).
Vintage Air has a network of dealers nationwide who will install their A/C systems for you, and this is probably the best way to go if you're not a skilled mechanic, don't have a lot of time, or a decent complement of tools. As with most other Corvette projects, the working quarters are quite cramped and often difficult to access. For that reason, lots of patience, sweat, and persistence are essential ingredients of an installation like this one.
Because "a picture is worth a thousand words," this is a three-part how-to, so that I can illustrate in detail what this installation takes from start to finish. As with most projects, here in Part 1 I'll go over the components of the Vintage Air kit as well as the disassembly procedures. Let's get started.